Specifications
UHF inlay tagA,factory for 15 years
B,ISO18000-6B/6C UHF inlay tag
C,offer free UHF inlay tag samples
D,12m read distance
RFID UHF inlay tag factory offer samples
RFID UHF inlay tag Description:
- Adopt Frequency Hopping working mode, with strong anti-jamming ability.
- User can define the reading& writing of standard data, to make their special application system more efficient.
- The effective reading distance can reach up to 8m (up to read and antenna). With 1024 writable user area (ISO18000-6B protocol) and 512 bits writable user area (EPC Gen2 protocol) .
- With ultra-wide working frequency design. Meet the relevant industry regulations, and is suitable for flexible application development.
- It can read and write multi-tags (up to 50pcs/s ), and is not affected or restricted by tag quantity in the working area.
- 1960 bits memory area for user to read, write and re-write. With permanent special area for appointed user.
- Passive type, with no battery. The memory area is re-writable for more than 100,000 times. The useful life can be 10 years above, so it’s very cost-effective.
RFID UHF inlay tag Specifications
Protocol | ISO18000-6B, ISO18000-6C (EPC GEN2) |
Frequency Range | ISM 902~928MHz (FCC), ISM865~868MHz (CE) |
Working Mode | Fixed Frequency or FHSS, Software Programmable |
Memory Capacity | MR6740A tag supports ISO18000-6B protocol, with 1024 bits (128 bytes) writable user area; MR6740B tag supports EPC GEN2 (ISO18000-6C), with 96bits writable EPC Code area, and 512 bits writable user area. |
Reading Rate | Software Programmable. Average Reading per 64Bits: <10ms |
Tags Material | Paper material, tamper-proof |
Reading Range | >12 m maxium, determined by reader and antenna |
Operation Temp | -20°C~+80°C |
RFID UHF inlay tag pictures
