Product Details

hydraulic power unit

Equipped with the zero leakage double-check solenoid valves, this power unit fulfils the complete separation of the two independent circuits,which are respectively for the main platform and subordinate platform of the double scissors lift. By increasing the number of the solenoid vavles, it is easy to get more independent circuits, which are used to control the corresponding cylinders.

Outline dimension

Model Specifications

Model	Motor Volt	Motor power	Rated Speed	Displacement	System pressure	Tank Capacity
YBZ-F2.7C3G30/GBCEJ1	220VAC	1.5KW	1400rpm	2.7mL/r	22MPa	8L
YBZ-F3.2E3G30/GBCEJ1		1.5KW	1400rpm	3.2mL/r	20MPa	12L
YBZ-F2.5F3H30/BCCEJ1		2.2KW	2800rpm	2.5mL/r	18MPa	14L
YBZ-E3.2G3H30/GCCEJ1				3. 2 mL/r	15MPa	16L
YBZ-D4.2G3H30/GCCEJ1				4.2mL/r	10MPa	16L
YBZ-F2.7H4I30/BCCEJ1	380VAC	3KW	2800rpm	2.7mL/r	20MPa	20L
YBZ-F3.2I4I30/GCCEJ1				3.2mL/r	18MPa	22L
YBZ-E3.7J4I30/GCCEJ1				3.7mL/r	16MPa	25L

Remarks:

Please consult us for the different pump displacement, motor power or tank capacity.

60HZ motors with CSA or UL certification are available upon request.

Special notes:

1. The power unit is of S3 duty, which can only be worked intermittently, ie., 1minute on and 9 minutes off.
2. Clean all the hydraulic parts concerned before mounting the power unit.
3. Viscosity of the hydraulic oil shoud be 15~68 cst, which should also be clean and free of impurities. N46 hydraulic oil is recommended.
4. This power unit should be mounted vertically.
5. Check the oil level in the tank after the first start of the power unit.
6. Change the oil after the first 100 hours of running the power unit, then change the oil every 3000 hours.
7. We are at your disposal to offer you the power units with your favorite power, flow, pressure as well as the tank capacity.