No beams FRP water tanks
Negotiable /Set
Min.Order:1 Set
Qinhuangdao Shengze New Material Technology Co., Ltd.
FRP water tank is assembled by moulding single board, sealing , metallic structure, and plumbing. We can supply any specification according to customer's requirement to meet different use.
Panel size: 1m*1m, 1m*0.5m, 0.5m*0.5m
can combine any volume tank
Thickness: 4mm~24mm.
Manufacturing Process:
SMC hot pressed compression moulding
Tank Structural Support:
- Standard Type: Hot Dipped Galvanized Steel
- Standard Type: SS 304 Tie-Rods or Cleat Angle Stay
Roof Support - PVC Vertical Poles and GRP roof panel stiffener
Sealant:
Non toxic PVC foam
Bolt, Nuts, Washers:
- Standard: Hot Dipped Galvanized Steel
- Optional: SS 316/A4 (In-contact with water)
Roof - Hot Dipped Galvanized Steel or unless otherwise specified
Ladder:
Standard: Hot Dipped Galvanized Steel
Water Level Indicator:
Standard Reversed Reading Mechanical Ball Float Type with Mouse
Optional: Direct Reading Clear Tube Type
Nozzle Panel:
Flat panels will be provided for any type of piping materials.
Specifications:
Item name | FRP water tank |
Techniques | SMC: Sheet Molding Compound |
Reinforcing material | Fiberglass, glass fiber and glass mat |
Basic Material | Special unsaturated polyester resin |
Auxiliary Material | Gel coat resin, firming agent Accelerating agent and abrasive material. |
Parameters
| Tensile strength (Mpa): ≥60 Bending strength (Mpa): ≥100 Barcol hardness (Mpa): ≥60 Flexural modulus (Mpa): ≥5900 Water absorption: ≤1.0% Fiberglass content: ≥25% Maximum distortion of side wall ≤0.5% Distortion of the bottom≤8mm |
Specification
| Water tank size:1.0*1.0*1.0m, 1.0*2.0*1.0m, 1.0*3.0*1.5m, etc SMC board size:1.0*1.0m, 1.0*0.5m, 0.5m*0.5m Wall board thickness:5mm,8mm,10mm,12mm,14mm,16mm etc |
Measure | 0.125-1500m3 |
Characteristic
| 1, leak-proof Due to the material is fiberglass reinforce plastic with high density, adding the sealing tape is high performance with non toxic, so it's leak-proof tank. 2,Long lifetime Our FRP water tank with maximum distortion of the sidewall is less than 1 percent of the height, maximum distortion of the bottom center is less than 10mm. The normal durable lifetime is more or less 30 years. |
Application
| Our FRP water tank is widely used in factory, Enterprises, government hotel, motel, restaurant, residence as storage facility as well as places with high requirements for water quality, such as hospitals and food processing plants. Also use it as equipment in drinking water treatment and fire water supply. |
Certification: