Water pressure regulator
Negotiable /Piece
Min.Order:100 Pieces
Regulators are an extremely important part of your watering system as they allow you to control the amount of pressure in your water line. Whether the pressure is too high or too low, Regulators can regulate and stabilize the pressure making sure the proper amount of water is in the pipe at any given time.
Standpipes & Standpipe Kits | The standpipe is also an important part of your watering system as it helps you determine the amount of pressure in your water lines. | Rigid (left) & Flex (right) Standpipes The Rigid Standpipe has a wider opening allowing for simple maintenance and it also has a larger blue ball that makes it easier to see from a distance. The Flex Standpipe, on the other hand, allows for more flexibility, both figuratively and literally. You can bend it down, if needed, and you won't have breakage from large birds hitting it. |
Rigid Kit This kit attaches the standpipe to the regulator - whether it be mid-line or end assembly. The valve allows you to turn the standpipe off when you need to flush your water lines. | |
Standpipes Rigid | Flex Kit Same as the Rigid Kit (see above), except this kit attaches a Flex Standpipe to a regulator. |
Folding Standpipe It can be used with either the rigid or the flexible standpipes, and allows them to lay parallel to the water pipe. If you have low ceiling height, you need our Folding Standpipe. | |
Folding Standpipe Lower your Standpipe | Intakes & More Below are some other important components of the regulators that help build your complete watering system. |
flush intake Flush the lines Quickly&easily |
E-Z Flush Intake
Now, flushing your water lines is even easier and cleaner. With 3/4” hose and openings, Intake will flush any debris out of the pipe. Just twist the handle to REG, FLUSH or OFF. No additional installation required, just screw into the regulator. In the REG position, the water will be regulated normally with changes made by the knob underneath. In the FLUSH position, water bypasses the seal and flushes into the water lines. In the OFF position, all water flow stops. Which with all of our standard diaphragm regulators. An optional solenoid makes flushing the lines automatic. Hook it up to your controller or a thermostat to flush on time or temperature.
help adjust and control the pressure |
High & Low Pressure Intakes
Pressure gauge:10-100 PSI(or 1-15 PSI) |
Pressure gauge:10-100 PSI(or 1-15 PSI)