Lightweight underfloor heating insulation board
Insulation & waterproofing solutions !!!
Product structure:
Made of high-performance waterproof extruded polystyrene, it has a 0.75mm coating on either side comprising a glassfiber mesh embedded in a polymer cement mortar.
Product appearance
The boards have straight edges. The color of the surface is grey and the core material is light blue
Reaction to fire
The boards are classified as class E according to EN 13501-1. When the boards are covered with tiles, their fire performance should comply with local construction laws and regulations.
Reinforcement
1. Dry areas: reinforce all joints between boards, floors and walls by 5cm or 10cm wide self-adhesive tape.
2. Wet areas: reinforce by suitable waterproof tape.
Standard dimensions and weight :
Thickness(mm) | Weight(kg/m²) | Length by width(mm*mm) |
6 | 2,7 | 1220 x 600 |
10 | 2,9 | 1220 x 600 |
12 | 3,0 | 2440 x 600 |
20 | 3.1 | 2440 x 600 |
30 | 3,3 | 2440 x 600 |
50 | 4,2 | 2440 x 600 |
The board has the following tolerances:thickness:± 2mm width:± 2mm length:± 3mm
Main applications:
Used as a watertight layer on walls and floors in houses, hotels and other wet areas such as bathroom, shower room.
1.Attaching to masonry,concrete or plaster
2.Screwing onto laths and supports
3.Concrete floors
4.Timber floors
5.Underfloor heating
6.Bathtubs and shower tray surrounds
7.Vanities and shelving
8.Pipe coverings
Fixing
Choose a way to fix Olingen boards according to the substrate to be fixed to.
Normally,using modified tile adhesive for solid concrete wall/floor and strengthened by mechanical fixings when necessary while only using mechanical fixings for wood and steel frames.
Reinforcement
1. Dry areas: reinforce all joints between boards, floors and walls by 5cm or 10cm wide self-adhesive tape.
2. Wet areas: reinforce by suitable waterproof tape.
Waterproof strengthen
1. Strengthening all joints between boards, floors, walls and mechanical fixings placements by suitable waterproof tape.
2. Strengthening joints between walls, outside corners and inside corners by special corners.
3. Sealing pipe holes with special waterproof tape.
4. Strengthening once again by waterproof glue, liquid tanking membrane, tanking membrane paint, etc. when necessary.
Effect on indoor environment
Olingen board has been assessed as not emitting any particles,
gases or radiation that may have a negative effect on the indoor climate or to have any significant effect on health.
Environmental declaration
The product does not contain any substances on the observation list of dangerous substances published by the national environmental authorities.
x
Olingen Group is a professional supplier in architectural material for 20 years, owned 5 factories, 7 subsidiaries and 8 individual brands. Main products include: cultured stone,cultured brick,Sands stone,imitation wooden products,EPS components,brick panel,wall insulation,tile backer board,xps shower tray and other building materials.