Delivery Time:15-30 days
Certification:ROHS,ISO9001,TS16949
Industrial Use Red Paint Fe37 Strong AlNiCo Pot Magnet with Tapped Hole, Holding Magnets
AlNiCo rod magnetic is pressed into soft steel pot, with tapped hole at rear including a non-magnetic sleeve. AlNiCo pot magnet can be used at application of long-term exposure to temperatures up to 450℃, without suffering structural changes inside magnet. Exposing to such high temperature, holding power may lose 30% to 40%, however the process is reversible and there is no continuous build-up power losses.
Detail specification is as following:
| Part No | POT | Magnet | Coated |
Pull Force (N) |
|||
| Material | A | B | M | ||||
| PI01-08 | Fe37 | 8 | 8 | M3 | AlNiCo | Zn | 5 |
| PI01-9.5 | Fe37 | 9.5 | 15 | M3 | AlNiCo | Zn | 8 |
| PI01-9.5A | Fe37 | 9.5 | 15.8 | M3 | AlNiCo | Zn | 8 |
| PI01-10 | Fe37 | 10 | 10 | M3 | AlNiCo | Zn | 8 |
| PI01-12 | Fe37 | 12 | 16 | M5 | AlNiCo | Zn | 15 |
| PI01-12A | Fe37 | 12 | 16 | M5 | AlNiCo | Red Paint | 15 |
| PI01-12B | Fe37 | 12 | 17 | M3 | AlNiCo | Zn | 10 |
| PI01-12C | Fe37 | 12 | 17 | M4 | AlNiCo | Zn | 10 |
| PI01-12.7 | Fe37 | 12.7 | 15.8 | M4 | AlNiCo | Zn | 15 |
| PI01-12.7A | Fe37 | 12.7 | 15.8 | M5 | AlNiCo | Red Paint | 15 |
| PI01-16 | Fe37 | 16 | 20 | M4 | AlNiCo | Zn | 18 |
| PI01-17 | Fe37 | 17 | 20 | M4 | AlNiCo | Zn | 18 |
| PI01-17.5 | Fe37 | 17.5 | 15.8 | M6 | AlNiCo | Zn | 25 |
| PI01-17.5A | Fe37 | 17.5 | 16 | M6 | AlNiCo | Red Paint | 25 |
| PI01-17.5B | Fe37 | 17.5 | 16 | M6 | AlNiCo | Zn | |
| PI01-20 | Fe37 | 20 | 24 | M4 | AlNiCo | Zn | 42 |
| PI01-20A | Fe37 | 20 | 24 | M6 | AlNiCo | Zn | 42 |
| PI01-20B | Fe37 | 20 | 16.2 | M4 | AlNiCo | Cr | |
| PI01-20C | Fe37 | 20 | 24 | M6 | AlNiCo | Zn | |
| PI01-20.6 | Fe37 | 20.6 | 19 | M6 | AlNiCo | Zn | 40 |
| PI01-20.6A | Fe37 | 20.6 | 19 |
