CW250 Stepper Driver Controller for CNC Router Step Motor Driving
This stepper driver is CW250 2 Phase Microstepping Stepper Motor Driver, 8 subdivide, 20-60VDC 5A, controls the nema23 nema34 stepping motor and 57 86 serial stepper motor, widely used on small size CNC router engraving machines.
CW250 Stepper Driver Parameters:
1, Input Voltage: 20 ~ 60VDC single voltage supply.
2, Phase Current: the current module can be adjusted (0~5A).
3, Drive Mode: full bridge drive.
4, Fine Points: 1/8, 1/2 (the whole step is 1.8 degrees).
5, Operating Characteristics: better than the original motor factory indicators.
6, Protection Form: over heat protection, lock automatic half flow.
7, Size: 140mm * 94mm * 45mm
8, Weight: <500g.
9, Operating Environment: temperature -15 ~ 40
10, Humidity <90%
CW250 Stepper Motor Driver Terminal: (PORTS I/O)
1, VCC: power supply 20~60VDC
Note: avoid more than 60V, so as not to damage the module
2, GND: VCC power supply corresponding ground
3, B+, B-: a phase stepper motor package
4, A+, A-: another phase stepper motor package
(if it is found that the motor runs in the direction of the reverse, only A+, A- can be transferred)
5, CP +, CP -: step pulse input (the rising edge of the effective, duration of >10 S)
6, CW +, CW-: motor running direction control, through the control of the terminal level can be changed motor running direction
7, RST+, RST-: emergency stop reset
CW250 Step Drive Note: (CAUTIONS)
Motor connection: this drive module is suitable for the two phase, four phase hybrid stepping motor with rated current 5A. Please note that the motor line do not connect wrong, so as not to burn the drive module.
Avoid contact with corrosive gases.
When the environment temperature is higher or the working current is more than 3A, the module should be fixed on the large metal shell, and the axial flow fan is applied to heat radiation, so that the module can run reliably for a long time.
RicoCNC also can supply Leadshine stepping drivers, spindles, and other cnc spares.
Welcome your inquiry.
CW250 Stepper Driver Controller for CNC Router Step Motor Driving
Brand Name | RICOCNC |
Model Number | CW250 Stepper Driver |
Product Features
You May Like
- Woodworking machine/cnc router/cnc wood router
- 1500w inverter/power inverter /inverter welding machine
- 2000w inverter /solar inverter/pure sine wave inverter
- 3000W inverter/power inverter /pure sine wave inverter
- inverter 3000w/solar inverter /dc to ac inverter
- inverter 5000w/pure sine wave inverter /dc to ac inverter
- sale AC High speed motor for edge wooden machine
- Tideway Invisible fastener bits router bits for locker or woodworking factory high quality
- TIDEWAY HSS W5 W18 TCT Wood Planer Blade for woodworking CEHISA Edgebander Edge Banding Machine
- Tideway Industrial Grade Semicircular Router Bit CNC HALF ROUND BITS
Popular Searches
ncstudio pci card
Head Planer
ncstudio cnc control card
ab glider machine
Head Knife
black box motion control
dsp cable
dual handle controler
hss shaper cutter
hole punch driver kits
hitachi planer blades
micro lead
makita planer knife
makita planer blades
playstation move motion controller
playstation 3 move motion controller
Find Similar Products By Category
You May Like
- TIDEWAY PCD SPIRAL BITS Z3+3 diamond ROUTER BITS TOOLS
- TIDEWAY PCD SPIRAL BITS Z2+2 Diamond PCD woodworking cnc milling cutter CVD Slotter router
- TIDEWAY PCD SPIRAL BITS Z1+1
- Tideway PATTERN BITS Wood Woodworking Tungsten Straight Bit With Bearing
- TIDEWAY CNC Carbide Bits With Micro - Grain Solid Carbide Sprial Ballnose Bits With Double - Side Thin Slices
- TIDEWAY Patten Cnc Router Bits With Reversible Knives, Finished Sandblast Or Black Color
- TIDEWAY LC1602 "T"type slotting bit woodworking tools
- TIDEWAY LC0202 HORSE NOSE BIT
- TIDEWAY LC0702 Cove Box Bit New Arrived Tungsten Carbide Tools
- TIDEWAY handrail bit LC1105 router bits kimberwick bit
- TIDEWAY LC0602 Corner Round bits Double Flute Solid Surface Lower Ball Radius Bearing Guide Carbide Round Over Edging Router Bit
- TIDEWAY LC0118 T.C.T MORTISING BIT Z3 Woodworking Milling Cutter Density board CNC knife Engraving cutter Router Bit
- TIDEWAY INDUSTRIAL GRADE FLUSH TRIM BIT 2 FLUTE HIGH QUALITY ROUTER BITS
- TIDEWAY LC0111 TCT SOLID CARBIDE STRAIGHT BIT(STEEL SHANK) TIPPED WHOLE CARBIDE
- TIDEWAY TOOLS LC0502 COVE BOX BIT FOR WOODWORKING