Overview1GE 1FE XPON ONU has 1 x 10/100/1000Mbps (GE) and 1 x 10/100Mbps (FE) auto adaptive Ethernet interfaces, full/half, RJ45 connector, 9602C chipset, power AC90~230V.
In some FTTH solutions, 1GE 1FE XPON ONU is designed as an HGU (Home Gateway Unit). The carrier-class FTTH application allows users to access a variety of services. The dual mode XPON ONU is based on XPON technology, which is mature, stable, and cost-effective. When access to the EPON OLT and GPON OLT is granted, it may automatically switch to EPON or GPON mode.
To fulfill the technical performance of the GPON Standard of ITU-TG.984.X and the EPON Standard of China Telecom CTC3.0, XPON ONU WiFi uses high reliability, easy management, configuration flexibility, and good service quality assurances. This XPON ONU is compatible with all OLT brands, including Huawei, ZTE, and others.
Functional FeaturesSupport EPON/GPON mode and switch mode automatically
Support Route mode for PPPoE/IPoE/Static IP and Bridge mode
Support IPv4 and IPv6 Dual mode
Support 2.4G WIFI and 2*2 MIMO
Support SIP Proctol for Voip Service
Support CATV interface for Video Service and remote control by Major OLT
Support LAN IP and DHCP Server configuration
Support Port Mapping and Loop-Detect
Support Firewall function and ACL function
Support IGMP Snooping/Proxy multicast feature
Support TR069 remote configuration and maintenance
Specialized design for system breakdown prevention to maintain stable system
SpecificationHardware Specification
| Technical item | Details |
| PON Interface | 1 GPON BOB （Bosa on Board） |
| Receiving sensitivity: ≤-28dBm |
| Transmitting optical power: +1~+4dBm |
| Transmission distance: 20KM |
| Wavelength | TX: 1310nm, RX: 1490nm |
| Optical Interface | SC/APC Connector |
| Design Scheme | RTL9602C+RTL8192FR+Si32192 BOB(RTL8290B) |
| Chip Spec | CPU 625MHz,DDR2 64MB |
| Flash | SPI Nor Flash 16MB |
| LAN Interface | 1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| Wireless | Compliant with IEEE802.11b/g/n, |
| Operating frequency: 2.400-2.4835GHz |
| support MIMO, rate up to 300Mbps, |
| 2T2R,2 external antenna 5dBi, |
| Support: Multiple SSID |
| Channel: Auto |
| Modulation type: DSSS, CCK and OFDM |
| Encoding scheme: BPSK, QPSK, 16QAM and 64QAM |
| CATV Interface | RF, WDM, optical power : +2~-15dBm |
| Optical reflection loss: ≥45dB |
| Optical receiving wavelength: 1550±10nm |
| RF frequency range: 47~1000MHz, RF output impedance: 75Ω |
| RF output level: 78dBuV |
| AGC range: -13~+1dBm |
| MER: ≥32dB@-15dBm |
| POTS interface | 1 FXS, RJ11 connector |
| Support: G.711/G.723/G.726/G.729 codec |
| Support: T.30/T.38/G.711 Fax mode, DTMF Relay |
| Line testing according to GR-909 |
| LED | 10 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2、FXS、 Worn、 Normal(CATV) |
| Push-Button | 3,For Function of Reset, WLAN, WPS |
| Operating Condition | Temperature: 0℃~+50℃ |
| Humidity: 10%～90%（non-condensing） |
| Storing Condition | Temperature: -30℃~+60℃ |
| Humidity: 10%~90%（non-condensing） |
| Power Supply | DC 12V/1A |
| Power Consumption | ≤6W |
| Dimension | 180mm×107mm×28mm（L×W×H） |
| Net Weight | 0.2Kg |
Panel lights Introduction
| Pilot Lamp | Status | Description |
WIFI | On | The WIFI interface is up. |
Blink | The WIFI interface is sending or/and receiving data (ACT). |
Off | The WIFI interface is down. |
WPS | Blink | The WIFI interface is securely establishing a connection. |
Off | The WIFI interface does not establish a secure connection. |
PWR | On | The device is powered up. |
Off | The device is powered down. |
LOS | Blink | The device doses not receive optical signals or with low signals. |
Off | The device has received optical signal. |
PON | On | The device has registered to the PON system. |
Blink | The device is registering the PON system. |
Off | The device registration is incorrect. |
LAN1~LAN2 | On | Port (LANx) is connected properly (LINK). |
Blink | Port (LANx) is sending or/and receiving data (ACT). |
Off | Port (LANx) connection exception or not connected. |
FXS | On | Phone has registered to the SIP Server. |
Blink | Phone has registered and data transmission (ACT). |
Off | Phone registration is incorrect. |
Worn (CATV) | On | Input optical power is higher than 3dbm or lower than -15dbm |
Off | Input optical power is between -15dbm and 3dbm |
Normal (CATV) | On | Input optical power is between -15dbm and 3dbm |
Off | Input optical power is higher than 3dbm or lower than -15dbm |
