As a wireless network manufacturer, Ceres has more than ten-year experience in producing wifi extenders. If you have any demand, please feel free to contact us.
Indoor Dual-band Ceiling Access Point WP888
WP885/WP888 ceiling wireless access point is a high-stability, cost-effective 2.4 GHz +5GHz dual-frequency indoor AP launched by Shenzhen Ceres Technology Co., Ltd. (hereinafter referred to as Ceres), designed for the enterprise market. The low profile and simple design and stable performance make it the ideal equipment for ceiling installation.
WP885/WP888 ceiling mount ubiquiti access point adopts Qualcomm enterprise-class chip and equipment, with one 10/100Mbps WAN port and one 10/100Mbps LAN port. This business wifi router supports PoE power supply or DC12V power supply, also supports 802.11a/b/g/n/ac wireless standard. WP885 supports 2.4G/5G dual-frequency（300Mbps+433Mbps）wireless transmission rate，WP888 supports 2.4G/5G dual-frequency（300Mbps+867Mbps）wireless transmission rate. Optional support built-in GPON/EPON terminals, it is suitable for medium-density PON+WiFi environment, providing cost-effective wireless coverage.
Hardware Specification | |
Attribute | WP888 |
Dimensions | 155mmX155mmX40mm |
Interface | 2*10/100Base-Tx |
Rate | 300Mbps+867Mbps |
Antenna | Built-in 2 dual-frequency high-gain omnidirectional antennas |
Wireless Transmit Power | 2.4GHz: |
11b11Mbps：22dBm； | |
11g6Mbps ：22dBm； | |
11g54Mbps：19dBm； | |
11n MCS7-HT20：17 dBm； | |
11n MCS7-HT40：17dBm； | |
5GHz: | |
11a6Mbps ：20dBm； | |
11a54Mbps ：18dBm； | |
11n MCS7-HT20：17dBm； | |
11n MCS7-HT40：17dBm； | |
11ac MCS8-VHT20 ：18dBm； | |
11ac MCS9-VHT40 ：16dBm； | |
11ac MCS9-VHT80 ：15dBm； | |
Receiver Sensitivity | 2.4GHz: |
11b11Mbps：-90dBm； | |
11g6Mbps：-90dBm； | |
11g54Mbps：-75 dBm； | |
11n MCS7-HT20：-71dBm； | |
11n MCS7-HT40：-68dBm； | |
5GHz: | |
11a6Mbps：-90dBm； | |
11a54Mbps ：-75 dBm； | |
11n MCS7-HT20：-71dBm； | |
11n MCS7-HT40：-68dBm； | |
11ac MCS8-VHT20：-65 dBm； | |
11ac MCS9-VHT40：-63 dBm； | |
11ac MCS9-VHT80：-61 dBm； | |
CPU | Qualcomm processor |
Memory | 128MB RAM |
Flash | 16MB |
Power supply | POE/DC12V |
Operating Temperature | -10～50℃ |
Storage Temperature | -40～85℃ |
Operating Humidity | 5～95％(non condensation) |
Consumption | ＜10W |
Software Specification | |
Attribute | WP888 |
WLAN | Support IEEE801.11a/b/g/n/ac/ac wave2 standard |
Support dynamic rate adjustment | |
Support channel automatic scanning and manual selection | |
Support dynamic power adjustment and manual power adjustment | |
Support intelligent roaming | |
Support ShortGI in 20M,40M,80M mode | |
Support Chinese SSID | |
Support WMM, implementing data processing and forwarding based on application | |
Support 5G access priority | |
Support load balance based on AP traffic, frequency band, and number of users | |
Security | Support Open-system authentication mode |
Support WEP authentication/encryption mode | |
Support WPA/WPA2-PSK authentication/encryption mode | |
Support WPA/WPA2-802.1X authentication/encryption mode | |
Support WPA-WPA2 hybrid authentication mode | |
Support WPAI authentication/encryption mode | |
Support 802.1X, Mac, portal, WeChat authentication mode | |
Network | Support business traffic local forwarding and centralized forwarding |
Support user access isolation under the same SSID | |
Support user access (ACL) | |
Support bandwidth control based on per user | |
Support bandwidth speed limit based on WAN port | |
Support network detection based on Ping and Arp | |
Support local forwarding mode, when the AP is disconnected from the AC, the service is not interrupted. | |
Support DHCP Server, the client obtains the IP address through the AP | |
Support static IP/DHCP/PPPOE and other network access mode | |
Support IPV6 function | |
Support Soft GRE function | |
Management | Support cloud service mode deployment (ACS+VAP) |
Support AC centralized management | |
Support Web User Management (HTTPS) | |
Support CLI (SSH) management | |
Support Console port management | |
Support modify AP login password remotely | |
Support AP automatically go online and load configuration (plug and play) | |
Support LED light control | |
Support periodic automatic restart of devices | |
Support batch modification of AP management platform address | |
Support batch upgrade based on AP location, AP model, AP version | |
Support AP status alarms | |
Ordering Information | |
Product Model | Product Description |
WP888 | 2*10/100M Ethernet ports, support 2.4G/5G dual-frequency（300Mbps+867Mbps）, built-in 3dBi 2X2 MIMO antenna, support 802.11a/b/g/n/ac-wave2 protocol, support 802.3at/af PoE powered, support 48VDC power supply, Tx power 22dBm_2.4G，20dBm_5G（2.4G 2*2,5G 2*2） |
WP888E | 2*10/100M Ethernet ports, 1*EPON optical port, support 2.4G/5G dual-frequency（300Mbps+867Mbps）, built-in 3dBi 2X2 MIMO antenna, support 802.11a/b/g/n/ac-wave2 protocol, support 802.3at/af PoE powered, support 48VDC power supply, Tx power 22dBm_2.4G，20dBm_5G（2.4G 2*2,5G 2*2） |
WP888G | 2*10/100M Ethernet ports, 1*GPON optical port, support 2.4G/5G dual-frequency（300Mbps+867Mbps）, built-in 3dBi 2X2 MIMO antenna, support 802.11a/b/g/n/ac-wave2 protocol, support 802.3at/af PoE powered, support 48VDC power supply, Tx power 22dBm_2.4G，20dBm_5G（2.4G 2*2,5G 2*2） |
