BLE gateway Kit including :
1pc G1 Gateway
2pcs S1
2pcs I7 motion sensor nRF52832
2pcs E7 nRF51822 waterproof ibeacon
2pcs Beacon card C7 nRF52832
2pcs nRF52832 I6 beacon sticker
1pc E6 light sensor nRF52832
1pc nRF52832 D15N ibeacon tag
1pc nRF52832 AA battery powered Beacon i3
Gateway Specification
● Input: DC 5.0V, 1A, micro-USB
● Supports 802.3af PoE standard Supports firmware upgrade Over-the-Air
● Operating temperature: -25℃ to 65℃
● Reads multiple BLE devices in the same time
● Supports TCP/HTTP/MQTT/mbed(ARM)
● Built-in RTC and NTP support
● RGB LED string as the status indicator
● Based on OpenWrt 15.05
BLE:
● Bluetooth 5.0 hardware nRF52832
● With a power amplifier
● With 3dBi flexible FPC antenna
● 300 meters range in open space
● Rx sensitivity -108dBm
● Bi-directional (reads data / sends command)
● Up to 150 Mbps PHY data rate
● With 3dBi flexible FPC antenna
● 100 meters range in open space
● 1T1R 2.4GHz frequency band
● IEEE 802.11b/g/n
● Web based UI for configuration
● Connects to the local server or remote cloud
G1 BLE gateway can also connect to Ethernet directly to realize data communication with server.
It will ask whether to restart gateway after licking “Apply” button in Router setting column as shown in gateway
configuration interface, the network setting will take effect after restarting gateway. You may click “Cancel” to restart
manually later, or click “Reboot” to restart gateway immediately. G1 BLE gateway connects to superior router reticle;
after restarting, it automatically acquires IP address from superior router through DHCP protocol, so as to connect
network. See picture below.
The state item in gateway WEB configuration interface will display current connection state and gateway address