CJ wire drawing machine for stainless steel wire
1. Usage for wire drawing machine for stainless steel wire:
2. Main Features:
1. Two motors can precisely control the spool wire tension to reduce the slip ratio of wire to a minimum manner. 2. Transmission by timing belts. 3. Lubrication by water immersion.
3. Technical Parameter:
Power Control | Dual frequency conversion control |
Most modulus | 12 |
Inlet wire diameter | Φ2.0mm—Φ1.5mm |
Wire finished diameter | Φ1.0—Φ0.50 mm |
Maximum line speed | MAX300MPM |
Slip ratio | 15% |
Constant speed capstan slip ratio | 13% |
Host body structure | Welded steel |
Capstan | Spray tungsten carbide Capstan |
Drawing motor | 22KW |
Take-up Power | 5.5KW |
Max.capstan diameter | Φ350mm |
Fixed speed capstan diameter | Φ260mm |
Take-up shaft dimensions | Φ300mm or according to customer specified |
Take-up way | Top center screw tight type |
Pay-off way | 110W synchronous motor |
Transmission | Timing belt drive |
Take-up control | PID automatic control variable bit detection |
Deflection detection device | Arm type |
Tension adjustment method | Counterweight way |
Maximum load | 50KG |
Drawing Lubrication | Full immersion |
Brake | Electromagnetic brake |
Bearing Lubrication | Oil-free |
Voltage | 380V 50HZ or specified voltage |
Drawing oil | 40 liters / min |
Weight | 2000KG |
The drawing machine is used for drawing stainless or alloy wire .
After-Sale Service:
1: In order to help customers are able to operate the machine correctly, trainings on operation, maintenance and simple repair can be supplied if necessary. 2: Mechanical parts are provided one-year limited warranty, and electrical parts are six-month since the shipment date.