Automatic Spacer Bending Machine / Double glass production line machine /Insulation glass equipment (LW02)
Semi-automatic Alu-spacer bending machine for double glass/insulating glass/vacuum glass
1.Main Function Introduction
1).The startup was controlled by single button, and it is adopted touch screen.
2).The head of the cutter can be adjusted automatically.It can operates without changing the cutter aluminum spacer when the width of the spacer is bigger than 6mm.
3).Fuji servo feeding system with digital control, bending angle. digital control system, siemens control system.
4).To reconnect the ends automatically, and to prevent the ends being clashed intelligently.
5).Judging the processing data intelligently.
6).The remanent can be processed again and no tailings exist.
7).Cutting the feed supply automatically when the processing is done.
8).Counting the output.
9).Remaining dormant state to save energy consumption when there is no processing.
10).Adopting the emergency stop.
11).Adjusting the bending speed automatically.
12).Performing the processing at a high speed, efficiency and continuity.
13).Adopting an automatic storage tank which can feed the material automatically and reconnect the aluminum spacer automatically.
14).Can bend both the arc and shaped aluminum spacers.
15).Manual control to debugging the trial run.
16).The head of the cutters is adjustable and processing data can be figured by customers themselves.
17).Indicating the relevant information when there is no supply, when it is in dormant state, when there is any malfunction, when it is in working state, and even can indicate debugging information for any wrong with the machine.
18).Adopting clock to display the current date and time.
Kindly note:
Before you buy the machine, please make sure then tell me your local power supply,then we can make the right according to your true voltage.
2.Main Technical Data
model | LW02 |
Power supply | AC220V,50HZ |
Motor | 2.5KW |
Air supply | 0.6MPa |
Aluminum bar size | width:6mm-24mm |
Length:2000-4000mm | |
Aluminum spacer size | min 250*150mm |
max 2500*2500mm | |
Processing speed | <30s/pcs(1000mm*1000mm) |
Date number | set 4 groups of specification*8 kinds of size*9999 piece at the same time |
Figure Dimension | 10500×2100×2200mm |
Total Weight | 1800Kg |
3.More pictures of the model LW02
4.Bended Aluminum spacer sample
5.Full-automatic desiccant filling machine
This machine can togther work with the semi-automatic alu-spacer bending machine.
6.Insulating glass/double glass/hollow glass good advantages
1).sound insulation, noise reduction
2).keep warm
3).dust prevention
4).reduce thermal radiation
7. Contact information