3d wheel aligner john bean system for launch used garage equipment
Features of 3D series wheel alinger
1, Leading technology
The most advanced 3D imaging technology on the auto alignment ,much different from traditional rectangular coordinate system measurement , is the polar coordinate measurement based on the auto body .It is more accurate , convenient ,and simpler;
2,Photographic measurement
With Double cameras and 4 target panels , the 3D digital imaging measurement technology has broader view than the traditional sensors , it has a revolutionary measurement and computational model ;
3,Easy operation
The leveness on the car lifts doesn’t influence the measuring accurancy ,even the auto bodies are inclinable or the tires are worn-out,we can get the measurement datas just by push the vehicles ahead or just roll the wheels . Timely calibration is saved .The mainteance is so simple that the steel rings compensation is avoided .The operational efficiency is higher ;
4, Simple mainteance
The anti-knock design on the target panel , is made of the imported anti-corrosion material.It doesn’t have the electronic components ,battery ,wire .The faults are eliminated and the maintenance is so simple . Metal supports on the bodies andthe aluminum beams have good performance against the corrosion. Brand computers can caculate large amount of the datas and it is more reliable .
5, one-top calibration
The Calibration is done in the factory ,simple handle .Repeating procedures are avoided .
6,Strong datas
It has more than 20000 vehicle model original datas in 30 years . Users can also added the latest vehicle datas at any time . The datas are upgraded freely by the internet assistance.
7,Low-carbon and environmental protection
Advanced industrialization design , free maintenance cost , new low-comsumptional design ,safer and more power-saving.
Core advantages of V3DI
1,Windows 8 system , the lastest 3D alignment software, International standard navigation instructions , easy to learn
2,no electronic componments on the panel , wireless , no-battery , we don’t have to transfer data by blueteeth or infrared ray , the possiblity of the trouble is less ;
3,more accurate ,and the repeated measuring errors can meet the international standard based on the high-class vehicles;
4,brand computer can be kept for 10 years , we don’t have to replace it , the cost is saved;
5, one-top calibration is done before being sold , and it can be used at once when we instal it ,we don’t have to reset it if relocation appears;
6,it is also installed Volkswagen VAG exclusive program, we can test the toe on PASSAT B5,and AUDI A6;
7,The operation way is that we fixed the 4 target panels on the rims , we push the cars ahead ,or roll the wheels ,the alignment can be done . The alignment date can be compensated automatically , the data will be more accurate . It will be easier in operation;
8,3D imaging technology,We can also have an accurate alignment without a horizional test platform;
9,Multiple language for choosing,avaliable in 26 countries and regions in the world;
10,we can also measure the date if the chassises are so low;
11, it can also be a good diagnosic helper when we meet the wrecks maintenance by the accurate measuring data on the chassises
12,there are specific instructions on the menus , clear mark in bright colors , mistakes is avoided from the operators
Technical data:
Item | Accurancy | Range | Total range |
Camber | ±0.02° | ±10° | ±10° |
Caster | ±0.05° | ±10° | ±10° |
KPI | ±0.02° | ±20° | ±20° |
Toe | ±0.02° | ±2.4° | ±4.8° |
Rear axle offset | ±0.02° | ±2° | ±4° |
Max steering angle | ±0.08° | ±20° | ±45° |
Thrust-angle | ±0.02° | ±2° | ±4° |
Track with difference | ±0.03° | ±2° | ±8° |
Front setback | ±0.02° | ±2° | ±4° |
Rear setback | ±0.02° | ±2° | ±4° |
Track width | ±0.64cm(±0.25cm) | <265cm(<105in) | <265cm(<105in) |
Wheel base | ±0.64cm(±0.25cm) | <533cm(<210in) | <265cm(<105in) |
Partical configurations:
This is the old design target panel ( best substitution of Johnbean ,Hoffman and GB brand ),but it is heavy and fragile
And now we upgrade it ,thinner , much more durable,and new caculation
All configurations are included :
Cabinet,computer,monitor(19’’),camera beam ,Steel column,camera,clamp, target panel,turnplate,steering lock, braker depressor, wedge,protectiong pad ,safety rope.
ANS32 software:
Packing:
Company information :
Established in 2004 ,Yancheng anisun automobile equipment Co.,ltd is a manufacturer of the auto maintenance machine.Passed CE ,ISO, we offer you top quality products and exclusive aftersale service . We have :
1)Car lifts (2 post , 4 post , scissor lift.etc);
2)Tire changer ( car , truck ,bus ,motorcycle ect , manual, semi/full automatic );
3)Wheel balancer (car , truck ,bus ,motorcycle ect , manual, semi/full automatic );
4)Wheel aligner( CCD and 3D series ,US technology with patent);
We also also help you to make plans about the start of a new tire shop ,garage and beauty shop;
Quality management
To guarantee high quality and efficient management, we have passed ISO9001 quality management system certificate and the CE certification;
All of our products are 100% inspected before shipment.Our whole manufacturing processes are under a very serious and strict system in our company.Calibration is done for the wheel aligner before deliery .
Product warranty
We provide 12-18 months trouble-free warranty and online support for all of our machines. We will provide the exclusive service forever. We are standing by for any of the quality problems on the machine we produce .
FAQ
1. Why should I choose Anisun products?
There are several reasons you should strongly consider purchasing anisun products :
Top raw materials from only the finest plants;
Only professional cost-effective equipment from China and abroad;
Low prices with high quality revenue producing products;
Increase productivity for your customers( Your customers gain more, they will enjoy buying from you.)
The best customer service. Quick reply within 24 hours and more.
2. How safe are Anisun 2&4 post car lift?
Our 2&4 post lifts have been tested and CE certified for safety . They also meet the American and Australian Standard,also passed CE .
3. Should I keep repair and replacement parts in stock?
Yes, most all commonly required repair and replacement parts should always keep in stock.
4. What type of fluid is required for my 2 post car lift?
We recommend use of a SAE10 hydraulic fluid that meets an ISO 32 specification, approximately 3 gallons / 12L are required.
5. Are Anisun car lift designed for commercial use?
All of our lifts can be used in commercial applications without any problems.
6. Do you offer any custom designs?
Yes,Anisun provide OEM/ODM services to top range partners.Produce a superior product for you by your designs.
Contact us
We welcome you to be our agents in the local markets . And we also like answering more questions from you .and pls contact us in 24 hours :
Email :admin at ansaligner.com
Whatsapp/Mob:0086186517850049
Trademanager : ansalinger
Skype :ansaliger at outlook.com