Specifications
1.Good fluidity.
2.For brazing refrigeration, air-condition etc.
Copper shot 0.5~10.0mm for brazing
HUAZHONG HZ-CUP-2 brazing alloy is used for the brazing of copper and copper alloys, brass and bronze. It can also be used on silver, tungsten and molybdenum. It is primarily used for the joining of copper to copper on vibration free joints. It is very effective for joining tight fitting and tubing. HZ-CUP-2 is extremely fluid at temperatures and will penetrate joints with very little clearance. The phosphorus content of HZ-CUP-2 acts as a fluxing agent and no flux is necessary when brazing copper to copper joints. However, when used with a copper alloy or one of the brazeable metals, a flux must be used to promote wetting, bonding and flow throughout the joint.
Welded Properties
Density:8.00 g/cc
Electrical Resistivity:0.0000315 ohm-cm
Solidus:710 Liquidus:710
Maximum Service Temperature, Air:149
Processing Temp.:740-850
Color: Light Copper
Electrical Conductivity(% IACS): 5.5
Chemical Elements(%): P:6.8-7.2, Cu:Bal.
Product Number |
Equivalent Standard
| Chemical Compositions(%) | Temperature (°C) | Advantages and Usage | ||||
Chinese Standard | AWS | Cu | P | Ag | Welding Point | Recommended Temperature | ||
HZ-BCuP-3 | BCu91PAg (HL209) | BCuP-3 | Remain | 6.8-7.2 | 0 | 710-820 | 740-850 | 1.Good fluidity. 2.For brazing refrigeration, air-condition etc. |
