Pro Lab Testing Equipment Programmable Temperature And Humidity Test Chamber

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Professional Lab Testing Equipment Programmable Temperature And Humidity Test Chamber

Description:

1.Import LED touch-screen controller,( Korea TEMI880), User-friendly, operation easy and simple.

2. Style design is perfect,arc type and surface spray coating,high texture appearance,use plane handle,easy to operate,safe and reliable.

3. Huge observation window,wide and bright visio.Use three layer vacuum coating window and Philips energy-saving fluorescent lamp, unnecessary Windshield wiper mist,keep Clear observation effect,observe sample condition in any time.

4. Water and electricity share to ensure safety, Humidifying system channel separate from power,controller and circuit board,to avoide leaking affect circuit,Improve safety.

5. Frozen and control system advanced and reliable,imported France Compressor, eco-friendly refrigerant

Applications:

This temperature and humidity test chamber is widely used in testing the various materials of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance.

suitable for quality control of electronics, electrical appliances, instruments, food, vehicles, metal, chemical, building materials, aerospace, medical etc.

Provide the simulation experiment of natural conditions by setting test chamber temperature and humidity..In order to test the reliability of the products in this environment.

Specifications:

I. Performance: refers to the air-cooled at room temperature 20 ℃, no load

 1. temperature range: 0 ℃ ~ 150 ℃

 2. humidity range: 20 ~ 98% RH

 3. the control stability:

   1) Temperature: ± 0.5 ℃

   2) Humidity: ± 2.5% RH

 4. the distribution uniformity:

   1) Temperature: ± 2.0 ℃

   2) Humidity: ± 3.0% RH

 5. the heating time: from -20 ℃ to 100 ℃ about 45 minutes

 6. cooling time: from 20 ℃ -20 ℃ about 55 minutes

 7. power:AC 380V 50/60Hz

II. The structure and material

 1. the inner box dimension: (W*H*D)500 × 600 × 500 (mm) --150 Liters

 2. outer box size: (W*H*D)1020 ×1650 ×1030 (mm)

 3. inner box material: SUS # 304 mirror surface stainless steel

 4. outer box material: SUS # 304 stainless steel plate of sand grain style

 5. the insulation layer: high-density rigid PU foam and the 24K glass wool

 6. the machine foot stool: bottom equip with 4 drive wheels, 4 level feet.

 7. door:

   1) single door, left hand open the door, the handle on the left,

   2) the window 280 × 300 × 35mm multiwall high definition electrical heating demist toughened grass

   3) The inner box equipped with a imported fluorescent light of 11W power

 8. draught fan: 60W lenghten axis motor with two sets of multi-wings type rotor

 9. heater: fin-type radiating pipe-shaped stainless steel heater

10. the furnace accessories: 2 sets of adjustable-layer with 2 stainless steel shelving

11. the test hole: the ø50mm hole on the left of the machine body with a stainless steel lid

12. the control panel

   1) Lighting type pressure buckle switch 2 pcs

   2) Temperature and humidity controller 1 pcs

   3) Power Switch 1

13. water tank

   1) one stainless steel water tank of 24L built in front

   2) a group of auto-supply pump, automatic water supply from the water tank for humidification and wet bulb

   3) water shortage alarm device 1 group

III. the refrigeration system

  1) original Tecumseh compressor imported from France,model: CAJ2464-J

  2) environment-friendly refrigerants

  3) fin-type condenser with cooling fan

  4) multi-stage evaporator that it can automatically adjust the load capacity

  5) Other Accessories: improted desiccant, oil separators, pressure protection switch and frozen refrigerant flow visual window

  6) The machine adopts two section refrigeration

V. the control system

 1. control mode: balanced thermostat humidity control system (BTHC), the PID control SSR, so that the heat and humidification is equal