Six-shuttle circular loom technical parameters and performances
Model | SBY-1400×6E |
Revolutions of main motor | 10-85 rpm/min (variable frequency control) |
Power of main motor | 5.5kw |
Main speed reducer | Taper gear wheel speed reducer connected directly with the electrical motor |
Shuttle quantity | 6pcs |
Track width | 125mm (the face of the track is plated with hard chromium) |
Fold diameter | 950mm-1400mm (the best scope is 1000-1350mm) |
Warp quantity | Max 1920pcs |
Weft density | 32-64pcs/100mm (Changing the weft density through changing gears) |
Theoretical output | 48-96m/h |
Warp diameter | Max φ120mm |
Weft diameter | Max φ105mm |
Involution machine | 15kg.cm |
Involution width | Max 1400mm |
Involution diameter | Maxφ1100mm |
Manner of length statistics | Mechanical three-shift length meter |
Specs of shuttles | Φ 38×230mm or Φ 38×270mm |
Specs of yarn plate | Φ 38 |
Warp-broken control | It stops automatically when warp breaks |
Weft-end control | Electrical motor type weft-end control device |
Lubricating style | The cam is lubricated circularly by force through gear pump(oil is deposited and filtered by oil box; The draw runner of shuttles is lubricated through needle valve oil dripping |
Oil route protection | It stops automatically when oil route has jam |
Dimension | (L)16m×(W)3.3m×(H)4.25m |
Device characters:
1 Small-cam designed, the inertia of start-up is small and the speed is high
2 The track with swallow-tailed cam prevents shuttles out.
3 The dynamotor type weft detector is sensitive and reliable and cannot be influenced by dusts. It can stop automatically when weft ends. The yield of product is high.
4 The cam is lubricated circularly by force, this can promote the efficiency of the machine. It has oil route jam alarming device, avoiding abnormal wearing and tearing of the parts..
5 Turbine speed reducer for cloth rolling adopts flexible connections. This can prolong the life of the speed reducer.
6 The fold scope is large. It is broad-spectrum. One machine serves several purposes.
7 The structure of device is reasonable, simple and reliable. It is reliable to operate. The quick-wear parts are few. The maintenance is convenient. The revolving cost is low.
8 The electrical system is controlled by PLC.
