1.Introduction
ESE-101
SBS modified bitumen waterproof membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as styrene butadieneSBS), reinforced with polyester or fiberglass, finishing the upward face with fine sands, mineral states (or grains) or PE film etc.
2.Specification
thickness | 3mm 4mm 5mm |
Width | 1.m |
Length | 10m/roll or do as your requirements. |
Base | Polyester / glass fiber / glass reinforced polyester tire |
Surface material | PE film, colored sand, mineral slate |
3.Features
1)high-strength membrane for resisting water;
2)Puncture-resisting, tear-resisting, corrosion-resisting, mould-resisting and weather-resisting;
3)Good tensile strength and elongation;
4)Strong adaptability for substrate shrinkage, deformation and cracks;
5)Both high and low temperature resistance, especially in cold areas;
4.Application
1)Roof and underground in industrial and civil buildings;
2)Bridge, subway, tunnel, swimming pool, etc;
3)Waste landfill, sewage plant, irrigation system, etc;
4)especially suitable to the building waterproofing in cold area and to the buildings of changeable construction
5.Performance Indicators(GB18242-2008)
6.Construction method
7. Package and delivery
8. Relative project
9 .Producing line and factory view
10. Our culture
11.Our advantage
effective operation model and quality products, timely custom service