The biological septic tank is based on high-strength glass fiber composite material reinforced with glass fiber reinforced unsaturated polyester resin, and adopts advanced glass fiber reinforced plastic winding technology to produce a cylinder-shaped head structure with concave and convex cotton wheels. The wall thickness and stiffened spacing of the cylinder are optimized by ansys structural calculation software for strength and rigidity. The structure design is unique and the technology is leading. It has light weight, high strength, good corrosion resistance, no leakage, no pollution, and molding. Good, long service life and other characteristics. There are advanced and outlet pipes at both ends of the tank body, an inspection wellhead at the top of the tank, and a partition board in the pool, and a flow-flooding device to increase the residence time of sewage and improve the effect of corruption.
Characteristic
1. High compressive strength: The molded septic tank adopts a ring-shaped dense corrugated structure, which has extremely high impact strength, which is several times higher than the traditional septic tank.
2. Small floor area: the traditional division is generally made of concrete piled up, occupying an area. The structure of the molded septic tank is relatively simple, covering only 60% of the traditional septic tank, saving general land resources.
3. Convenient installation: Due to the use of FRP material and factory production, it is more convenient and faster in transportation and installation. Generally, it can be installed and put into use on the same day, and is not affected by environmental factors.
4. Good tightness: integrated production, leading technology, no cracks and no leakage, avoiding the leakage of traditional septic tanks and affecting the safety of groundwater and buildings.
5. Low cost: While the performance of the molded septic tank is greatly improved, the cost and capital are also greatly reduced.
6. Durable: This product uses a polymer composite material, the material is resistant to oxidation, acid and alkali, not easy to aging, not easy to deform, corrosion resistance is very strong, under normal use, life is the same as buildings.
Parameter
|
Production specification parameter
|
||||||
|
Volume |
0.5m3 |
0.9m3 |
1m3 |
1.5m3 |
2m3 |
2.5m3 |
|
Specification |
730*1232mm |
840*1550mm |
900*1640cm |
1700*110mm |
1200*1900mm |
1180*2380mm |
|
Thickness |
3.2-5.5mm |
3.2-5.5mm |
3.2-5.5mm |
3.2-5.5mm |
5mm o 7mm |
7mm |
Working principle
The basic principle of the septic tank is to use the precipitation effect of the parasite eggs to be greater than the mixture of feces and urine and the closed closed anaerobic fermentation, liquefaction, ammoniation, biological antagonism and other principles to remove and kill parasite eggs and bacteria, control Mosquitoes breed, so as to achieve the purpose of harmless feces.
The three-slot septic tank is composed of three related tanks, which are connected by a manure pipe in the middle. The main reason is to use the principle of anaerobic fermentation, excessive middle layer and parasite eggs whose specific gravity is greater than that of the general mixed liquid and easy to settle. During the fermentation and decomposition of more than one day, the middle layer of manure flows from 1 to 3 pools in order to precipitate or kill parasitic eggs and germs in the feces. The manure in the third pool becomes a high-quality fertilizer.
Application
The preliminary treatment of life and fecal sewage in industrial residential buildings, office buildings, schools, nursing homes, enterprise workshops, living rooms and other residential buildings.
Product show
Related Products
FRP septic tank packaging: Packing in wodden carton or used the tarys
The accessories packing: Packing into woddern carton
Assembled water tank packing: Bulk cargo or nude packing
Depending on the quantity purchased custom space-saving purposes.
Hengshui Aoliande Trade Co., Ltd. is professional company which to market & sell FRP Pipe, FRP storage tank, FRP molded products, FRP pultrused products and FRP production machines, through the continuous development and introduction of professionality and technology, the company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 management system certification, now we have 50+ staff, annual sales of glass fiber reinforced plastic series products achieved 5,000,000 USD, products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia, Egypt etc, and won the support and trust from new & old customers.
Major products:
FRP vessel and chemical
equipment in sets;
FRP high, medium & low pressure pipe
FRP septic tank
FRP molded & pultrused products
Electrolytic cell S/F, F/F oli storage tank
Whole set of FRP prodcution machines
Hengshui Aoliande Trade Co.,Ltd. not only have ability to sell & supply products, but also has design ability of material,
structure and products, our company can provide customers with technical advice, supply of goods and material, transportation,
installation supervision etc service.
Main application:
Urban water supply and drainage
Desalination of sea water
Chemical industry
Metallurygy Brewing
Electric power
Oil storing
Sewage treatment
Building Municipal works
Highway facilities
Customers and certification
Q: Are you a commercial company or manufacturer?
A: We are a company with commercial company and factory together. Our trading company is called Hengshui Aoliande Trading Co., Ltd and the factory is called Hengshui Jiubo Composites Co., Ltd.
Q: I didn't see the dimension information or find the size I need, can you do it according to my requirements?
A: For FRP products, all dimensions can be customized. We can do it at the customer's request.
Q: How long is the delivery time?
A: Generally it is 5-10 days if the goods are in stock. Or it is 15-20 days if the products are not in stock, it is according to the quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free, but not pay the freight cost.
Q: What are your payment terms?
A: Payment <= 1000USD, 100% in advance. Payment> = 1000USD, 30% T / T in advance, balance before shipment.
If you have another question, please send us your question directly.
