Product Description
Glass fiber reinforced plastic(water tank) is actively promote composite materials products, its light weight, high strength, good toughness, corrosion resistance, bright colors, bright and clean degree, the advantages of mirror effect, has been far more than the ceramics, hard plastic, steel and other materials of similar products.
![](http://timg.china.cn/0/1_912_108804_750_750.jpg)
![](http://timg.china.cn/0/1_163_108706_800_600.jpg)
![](http://timg.china.cn/0/1_775_108786_800_637.jpg)
![](http://timg.china.cn/0/1_846_108446_750_904.jpg)
Main Features
1, Use high quality FRP composite material to make, with the advantage of antiacid,alkali-resistant ,pull-resistant,high strength etc.
2, Good tightness ,no leakage,completely prevent the pollution of traditional the septic tank ground water leakage. At the same time, improve the damage to building from foundation wet soft sink, with the better environmental protection efficiency.
3, Using unique structure design and high efficient membrane packing , high removal efficiency,small occupy area ,area selection flexible, special suitable for old city building area reform sewage system to set up septic tank.
4,Light weight, convenient to transport., install speedy.
5. High compression strength, can install in afforest lawn or below the path.
6, no late management, slag removal cycle is long
SMC Water Tank Range Applications
1). Potable Water Storage (drinking water)
2). Rainwater Harvesting & Storage
3). Emergency Water Storage
4). Pump Chambers
5). Effluent/Acid and alkali solution treatment & Storage
6). Hospital,buildings,building site, school and other place
![](http://timg.china.cn/0/1_821_108514_800_512.jpg)
Accessories
1. Support for Panels: The panels shall be supported externally or internally by an adequate support system. External Reinforcement - Hot Dipped Galvanized Steel
Internal Reinforcement - Hot Dipped Galvanized or Stainless Steel 304 rod support and tie-rod
2. Sealing Materials: Non toxic Rubber foam to be used for all jointing, it is especially developed with long experience and technology on SMC products. It maintains soft itself and adhesives even at low temperatures
3. Bolts, nuts and washers for the assembly of panels: Exposed externally are hot dipped galvanized steel and in contact with water internally are hot dipped galvanized steel or stainless steel 304
4. Flange: the flanges for inlet, outlet, drainage, overflow are hot dipped galvanized steel or stainless steel 304
5. Ladders: SMC sectional tank of 1.5m depth or more shall be provided with internal ladder made up of materials same with the supports. The external ladders shall be galvanized mild steel or equivalent
6. Drainage: The dome shaped bottom panel with a concave drain panel facilitates complete and fast drainage. The concave drain panel has been designed to ensure the periodic cleaning and inspection of tank
7. Overflow Screens: it can be supplied with a screen overflow having a micro mesh filter
8. Man-hole opening & Inspection Hatches: the size can be customized; normally it is supplied with a standard size of: 600 x 600mm. the opening can be designs of bolt, seal-tight locking arrangement
9. ABS roof vent with PE insect screen
10. Float level indicator, optional SS304 for internal and external support structure are available on request
![](http://timg.china.cn/0/1_960_108482_800_509.jpg)
![](http://timg.china.cn/0/1_250_108690_800_364.jpg)
![](http://timg.china.cn/0/1_881_108424_750_750.jpg)
Specification
GRP water tank possesses sheet molding compound, sealing materials, metal structure and piping system, etc. Designed capacity is from 0.125m³to 10000 m³
water tank height | bottom panel thk | side 1st panel thk | side 2nd panel thk | side 3rd panel thk | side 4th panel thk | side 5th panel thk | top panel thk |
1m | 1m*1m-7mm | 7mm | 4mm | ||||
1.5m | 1m*1m-8mm | 8mm | 7mm | 4mm | |||
2m | 1m*1m-8mm | 8mm | 7mm | 4mm | |||
2.5m | 1m*1m-10mm | 10mm | 8mm | 7mm | 4mm | ||
3m | 1m*1m-12mm | 10mm | 8mm | 7mm | 4mm | ||
3.5m | 1m*1m-14mm | 12mm | 10mm | 8mm | 7mm | 4mm | |
4m | 1m*1m-16mm | 14mm | 12mm | 10mm | 8mm | 4mm | |
5m | 1m*1m-18mm | 16mm | 14mm | 12mm | 10mm | 8mm | 4mm |
Packing & Delivery
Packing in wooden carton
![](http://timg.china.cn/0/1_884_108524_748_599.jpg)
![](http://timg.china.cn/0/1_513_108928_800_800.jpg)
![](http://timg.china.cn/0/1_501_108220_750_750.jpg)
Company Profile
![](http://timg.china.cn/0/1_637_108434_222_220.jpg)
![](http://timg.china.cn/0/1_965_108964_600_654.jpg)
![](http://timg.china.cn/0/1_796_108626_500_500.jpg)
Hengshui Aoliande Trade Co., Ltd. is professional company which to market & sell FRP Pipe, FRP storage tank, FRP molded products, FRP pultrused products and FRP production machines, through the continuous development and introduction of professionality and technology, the company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 management system certification, now we have 50+ staff, annual sales of glass fiber reinforced plastic series products achieved 5,000,000 USD, products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia, Egypt etc, and won the support and trust from new & old customers.
Major products:
FRP vessel and chemical equipment in sets;
FRP high, medium & low pressure pipe
FRP septic tank
FRP molded & pultrused products
Electrolytic cell
S/F, F/F oli storage tank
Whole set of FRP prodcution machines
Hengshui Aoliande Trade Co., Ltd. not only have ability to sell & supply products, but also has design ability of material, structure and products, our company can provide customers with technical advice, supply of goods and material, transportation, installation supervision etc service.
Main application:
Urban water supply and drainage
Desalination of sea water
Chemical industry
Metallurygy
Brewing
Electric power
Oil storing
Sewage treatment
Building
Municipal works
Highway facilities
FAQ
1. Q: Are you Trading Company or Manufacturing Factory?
A: We are both manufacturer and trading company. We have our own factory for almost 10 years, and we have better service of overseas customers. Welcome to send your inquiry!
2. Q: How about the Delivery time?
A: Normally, 10-15 days to finish the order for a 20ft container. Welcome to ask for the detailed delivery time according to your order quantity!
3. Q: How can you guarantee the product quality?
A: We have the quality control system ISO9001:2015, and it's been followed strictly. We also have the professional QC team, and each our package worker will be in charge of the final inspection according to the QC instruction before packing.
4. Q: What is about the payment terms.
A: Basically, the payment terms are paypal, T/T, L/C at sight. Western Union, Alipay.
5. Q: Can you do OEM for me?
A: We accept all OEM orders, just contact us and give me your design,we will offer you a reasonable price ASAP.