Sell Bottom Loading Water Dispenser

Model No.:GRA2-5D4
Product Origin:China
Brand Name:
Price Terms:FOB Shenzhen
Payment Terms:T/T or irrevocable L/C at sight
Certification:
Description:Item:GRA2-5D4 Character: Hot&cold,cook&cold romm temperature all in one Capacity: Hot: 500w,>90Degree, 5L/H, Cold:100w,<10Degree,2L/H, Reservoir: 304 stainless steel with volume:2.5L Hot tank: 304 stainless,0.4G volume Refrigeration system: compressor G.W/N.W: 27/23kgs Features and specifications: Hot&cold water swithes to provide three distinguish functions of hot&cold,room&cold and room temperature settings Energy savings switches for more versatility in use of cooler High volume pump fills revervoir automatically Water level sensor suitable for any type of water Equipped with 304 stainless steel construction for reservoir and hot tank Exclusive selted reservior provide excellent hygiene enviroment microchip technology Change water indicator Exclusive overflow protection Universal adapter Installation of the water cooler Place the cooler unit in cool place about 3inches from wall.Do not place near any open flame or anything heat sensitive materials. Installing the water bottle 1, when loading the bottled water for the first time and after loading,please note always makes sure the hot water&cold water switches are in "off" position. place the bottle up right on the rolling base. inserts the wand into the bottle and secures thte adapter onto the bottle.slowly pushes the rolling base,close to the door panel and inserts the plug.makes sure you drain some water from the hot tank by turning on the red faucet then turns the hot water switch on. RED LIGHT(ON WHEN THE BOTTLE IS EMPTY) GREE LIGHT( ON WHEN THE POWER IS PLUGGED IN) REST BUTTON:(PUSH THE RESET BOTTOM EVERY TIME YOU CHANGE A NEW BOTTLE OR BOXED WATER) 2,When" change water"indicator lights up(red light goes on) it is time to change bottled water or boxed water. bottle water: when changed the bottled water,pulls out the adapter and places the adapter on the adapter holder attached to the door panel of the cooler. removes the empty bottle and places the new one in position and then insets the adaptor prompty.close the door and puses the reset bottom the pump willl begin filling process.Boxed water; when changing the boxed water,makes sure you have a boxed water adopter on the lip of the water hose.simply connect adapter onto the boxed water following boxed water directions. Cleaning &maintenace it is recommended to clean the cooler with cleaning solution regularly idealy two times a year. rememberd always unplug the power first before you begin setp1:unplug the power and drain the cold water from the front cold water faucet(blue)and drain the hot water out completely by release the drain valve located on the back of cooler right below the hot tank. Caution: hot wate can scald hands.Turn the drain valve to a closed position when the hot tank is empty. step2: use a water bottle fill with cleaning solution and pump it through the system step3: after a few minutes drain out the cleaning solutions by repeat the procedure in step 1 above.Then,rinse the cooler by pumping the fresh water through the system couple times.When you completed the rinse process,make sure the drain valves is secure and tight. step4: clean the air filter located on the back of of cooler closed to the top. use a screwdrive open the box and remove the filter. clean it with clean solution and rinse. let it dry for few minutes.then place it back to the box. Trouble shooting: hot water not availble: make sure the power is plug on and the hot water switch is on water leaks: bottle is cracked-replace it . Cautions hot water is very hot ,please do not let children to use it whe using it for the first time and during clean up of cooler always make sure the hot water&cold water switches are in off position when cleaning the cooler make sure the power is off.only turn on when you need to pump the water through the system.