Product Details

high flow water industrial cartridge filter water filtration/replacement for PALL and Parker

Place of Origin Anhui, China
Brand Name OEM/HUAMO
Model Number MBR9

Product Features

High flow water industrial cartridge filter water filtration/replacement for PALL and Parker 

1.Gradient pore structure
2.replacement for pall filter
3.Up to 110m³/H flow rate

 

FEATURE:

It has a 6 inch/152mm large diameter, and is coreless, single open-ended with an inside to outside flow pattern.The large diameter with big filter area insures to reduce the number of filter cartridges and the dimention of housing required.The long service life and high flow rate result in low investment and less manpowert in many applications

-- Gradient pore structure

 

-- Up to 110M3/H flow rate per filter cartridge for water filtration.

 

-- Maximum 50% reduction of filter system

 

-- 20 inch /528mm,40 inch/1022mm and 60 inch/1538mm lengths are available

 

-- All contaminants can be removed within the cartridge because of the flow direction.

high flow water industrial cartridge filter water filtration/replacement for PALL and Parker

-- Prefiltration of RO,Pretreatment of sea water desalination

-- Condensate water filtration,hot water recovery in power generation
-- API, solvents,and water filtration in BioPharm market
-- The filtration of bottled water, high Fructose,edible oil,soft drinks,and milk
-- Paints and coatings,Petrochemical,Refineries
-- Microelectronics,film,fiber and resin

 

SPECIFICATION:

 

 

Outside Diameter:6 inch(152mm)
Length:  20 inch(528mm),40 inch(1022mm),60 inch(1538mm)

Filter media:

Pleated glass fiber
Pleated depth Polypropylene (PP)
PP Melt blown

Support/Drainage:Polypropylene (PP)
End caps : Glass fiber reinforced Polypropylene
Seal Material :EPDM, NBR  
Removal Rating: µm , 4.5 µm , 6 µm , 10 µm ,20 µm ,40 µm ,70 µm,100µm
Maximum Operating Temperature: 

Pleated glass fiber:121°C

Pleated PP: 82°C

Melt Blown PP: 65°C

Maximum Differential Pressure:

Pleated glass fiber:3.4 Bar at 121°C

Pleated PP: 3.4Bar at 82°C

Melt Blown:1.03Bar at 65°C

Recommended Change out Differential Pressure:2.4Bar at 20°C
Suggested maximum Flow of water: 

20 inch length:660LPM  

40 inch length:1,300LPM

60 inch length:1,900LPM

 Certificates:

high flow water industrial cartridge filter water filtration/replacement for PALL and Parker

 

 

 Packing:

 

high flow water industrial cartridge filter water filtration/replacement for PALL and Parker


You May Like

Find Similar Products By Category

You May Like

View More
Chat Now Contact Now