Stainless Steel Grease Trap for Kitchen Oil and Water Separate

The purpose of a grease trap is to collect and therefore reduce the amount of fats, oils and greases (FOG’s) that enter the main sewers. Grease entering the main sewer system will over time create blockages, foul odours and pest infestation. Grease traps have been in use since Victorian days and in simple terms are boxes positioned within the wastewater drain run from the sinks and appliances in a kitchen to the foul sewer system. They are design only to have kitchen wastewater flowing through them and should never have wastewater from other drainage system sources such as toilets.

They can be made from a number of different materials including Stainless Steel, Mild Steel, Plastics, Concrete and our own patented new innovative disposable G-Bag System. Effective commercial models range from 40 litres capacity to 45000 litres and above.
They can be located above ground, below ground, inside the kitchen or outside the building.

 They work on the basic principal that FOG’s float on water and solid particles sink. Baffles within the trap slow the inflow of wastewater from the kitchen sinks. This allows for a settlement period where the separation of oils, water and food particles within the unit. A trap on the outlet prevents FOG’s from flowing directly through the unit with the FOG’s retained within the unit along with food particles allowing clean water to flow through. The retained waste will build up over time and requires regular servicing and removal of waste for environmental disposal.

The grease trap can be used in the following areas:

Revised Building Regulation requires all new builds and refurbishments of hot food premises to have an effective means of grease removal on site. They are required on all sites that prepare hot food for the public or staff. Sites include the following:

• Hotels

• Schools and Colleges
• Restaurants

• Pubs and Inns

• Cafes

• Take Aways

• Conference Centres

• Bakeries

• Food Manufacturers

• Canteens at factories and offices

• Golf Courses

• Sports Venues

• No chemicals, absorbent, or filter cartridges to remove, replace, or dispose of
• Compact size
• Solids storage
• Optional integral oil storage
• Low maintenance cost
• Easily cleaned through removable vapor tight cover(s)
• No moving parts
• No power consumption
• No consumable wearing elements

Qingdao Yimei Environment Project Ltd. is found in 1988.We are located in the largest port city-Qingdao China. Our factary take up 36,000 square metres and there are more than 130 kinds machine for manufacturing. As a member of Shandong Province Environmental Protection Industrial Association, we have 360 staff and  72 experienced engineers.

Our main product is the equipment for Environment Protection and Waste Water Treatment.And the product is popular all over the world,such as Africa, North America,Domestic Market,Eastern Asia,Mid East.