Uv light sterilizer for water / in water treatment uv sterilizer
Product Instruction:
Open channel UV systems are mainly used at the municipal water/wastewater treatment plants for water recycling and effluent disinfection to ensure a better level of environmental protection.
UV disinfection is an effective and environmentally friendly alternative to the conventional chlorine effluent disinfection. Nowadays more than 15% of 2000 waste water treatment plants in North America have chosen the UV as the primary disinfection method. UV disinfection has proved its safety, reliability, efficiency, and economical characteristics over the years.
Advantages
- Low operating cost: Economical method to disinfect thousands liters of water
- Simple installation and maintenance (replacement bulbs and quartz tubes are also available)
- Safety: Built-in safety switch (eye saver) and UV intensity sensor
- Environmentally friendly: no need for dangerous or toxic chemicals
- No disinfection byproducts: purification chamber and connectors are made of 304 or 316 stainless steel which don't react with the UV light
- High disinfection efficiency: low pressure germicidal lamps provide efficient water treatment by UV rays. Stainless steel chamber reflection contributes to the total dosage, and helps to achieve up to 99.99% reduction in bacteria and viruses concentration
- High quality quartz glass sleeves provide maximum UV light transmission
| Support rack | 316 stainless steel with low carbon content |
| UV-C lamp | High intensity low pressure amalgam UV lamps. Preheating option prolongs the lamp lifetime (up to 12,000 hours of service life). 254nm wavelength, most efficient for pathogens destruction. Electronic ballast with variable output (from 50 to 100%) |
| Electronic ballast | Electronic ballast with variable output (from 50 to 100%) |
| Quartz sleeves and sealing | High transmittance glass sleeve (more than 92%) Protection class: IP68 (IEC 60529,DIN 40050); Thickness of glass tube wall: 1.5mm |
| Electrical cabinet | Housing material: 304 stainless steel. Voltmeter. Timer (non-resettable). Leakage protection. Alarm system. CE certificate on ballast. Automatic UV intensity monitoring system |
| Automatic cleaning system | Compressed air drive. Preset or manual (every 1-500 hours) Cleaning rings are made of UV resistant Teflon and Viton rubber |
Key components
| High-quality UV lamps Lamps imported from the US, Europe or Japan with maximum service life for low-pressure lamps up to 16,000 hours and 8,000 hrs for medium-pressure lamps. |
| High-transmittance quartz glass sleeves High-quality quartz glass sleeves with excellent light transmittance (more than 92%) and hardness (more than 7.0 Mohs scale). |
| UV intensity sensors Helps to constantly monitor disinfection intensity and efficiency. |
| Voltmeter and ampermeter Continuous monitoring of voltage and current to ensure stable operation of the UV lamps |
| Service life timer Provides information about lamps operating time to ensure timely replacement and stable disinfection performance. |
| Automatic wipers Regular cleaning of the protective glass sleeves improves the disinfection efficiency |
SS316L Frame
Installation For reference