undersink 5-stage RO system water purifier
Characteristics:
High grade RO membrane separation technology Automatic backward washing function
to extend the RO membrane life span Micorcomputerized, close cycled and automatic purification
eliminate secondary pollution First innovated water over loading and no water protection system
Major technical parameters :
The voltage and frequency of power source :220V/50Hz
Total input power :28 W
Pure water output :50 GPD/ 75 GPD/ 100 GPD (three choices)
Suitable source water pressure :0.1~0.4 Mpa
Permitted environmental temperature :5~38 °C
Notice:
- Pressure tank have an air vent and do not deflate it .
- Do not use the disproportional power source instead of voltage rating .
- If the system is not in use for a long period of time ,the plug of power source should be pulled out (optional if with pump ),and the inlet water ball valve should be shut to cut off source water .
- After long term out of service ,when using again should follow the operation as the first time .
- Careful handing is necessary during shipping ,moving and installation
Photos:
Packaging & Shipping