Delivery Time:20 DAYS
Certification:PED, ISO, GOST
Quick Detail:
Heat Exchanger stainless steel seamless tube bright annealed precision rolling
Surface: bright and shining
Base on excellente quality, satisfactory service and reasonable price, our products have exported to USA, Russia, Korea, Brazil, Chile, Peru and MId East, more than 20 countries.
1 Standard: ASTM A213/ASME SA213
2 Material: TP304,TP316L,TP310,TP347
3 OD:6mm-101.6mm
Thickness: 0.6mm-8mm
4 Certificate: PED, GOST, ISO
Heat Exchanger 304 / 316 / 310 Stainless Steel Seamless Tube ASTM A213 / ASME SA213
SIZE RANGE :
|
STEEL TYPES |
SIZE RANGE |
|
Stainless steel seamless pipe&tube |
OD: 6-101.6mm WT: 0.6-8mm |
MAIN STEEL TYPE AND GRADE :
|
PRODUCTS |
TYPICAL STEEL GRADE |
|
Austenitic |
TP304,TP304L,TP304H,TP316,TP316L,TP316H,TP316Ti TP321,TP321H,TP347H,904L,TP310H,TP310S,TP317,TP317L |
|
Duplex / Super Duplex |
S31803, S32205, S32750 |
MAIN PRODUCTION STANDARDS:
|
STANDARD TYPE |
STANDARD |
|
EN |
EN10216-5 , EN10216-2 |
|
DIN |
DIN 17456 , DIN 17458 |
|
ASTM |
ASTM A312, A213, A269, A511, A789, A790 ETC |
|
GOST |
GOST 9941 , GOST 5632 |
|
JIS |
JIS G3459 , JIS G3463 |
|
GB |
GB/T14975,GB/T14975, GB13296, GB5310, GB9948 |
Stainless Steel Seamless Pipe:
1.A999/A999M: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the pipe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO.
2. The Pipe lengths : Unless otherwise agreed upon, all size from NPS 1/8” TO AND INCLUDING nps 8 are available in a length up to 24ft with the permitted range of 15 to 24 ft. Short length are acceptable and the number and min, length shall be agreed upon between mfg and purchaser.
3. The finished pipe shall be reasonably straight and shall have workmanlike finish, Removal of imperfections by grinding is permitted, provided the W.T are not decreased to the less than the permitted in Section 9 of Specification A999/A999M
4. Butt Weld End: According to ANSI B 16.25
5. Pipe Marking: Specified in A999/999M, include “Logo+Standard+SIZE+Heat No.+Lot No.+H.T/E.T/U.T”
6. Packing: Each Pipe end is protected by Plastic cap. Then packed by Anti-rust steel strip, The outside of the bundle is plastic woven bag, or Plastic film.
7. Packing Mark: SIZE + STEEL GRADE+ QTY OF PIECE/WEIGHT/METRE.
8.MTC: BWSS Official Original MTC paper will be supplied for each order.
PACKING:
|
By Bundle |
By Wooden Yoke |
By Wooden Case |
Stainless Steel Seamless/Welded Pipe/Tubes
ASTM/ASME Standards
ASTM A 213/A 213M ASME SA213/SA213M Specification for Seamless Ferric and Austenitic Alloy-Steel Boiler, Su[perheater, and Heat-Exchanger Tubes
ASTM A 249/A 249M Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser tubes
ASTM A268/A268M, ASME SA268/SA268M Specification Seamless and welded ferritic and martensitic stainless steel tubing for general service
ASTM A269/A269M, ASME SA269/SA269M Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
ASTM A 270 Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
ASTM A312/A312M, ASME SA312/SA312M Specification for Seamless and Welded Austenitic Stainless Steel Pipes
ASTM A 358/A 358M Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pip
