Specifications
1. purify and regenerate oil2. remove acid
3. remove particles
Product Features:
This purifier features an inbuit special absorbent. And with special oil treatment techiques, this product can purifiy and regenerate aged insulating oil, turbine oil and other lubricating oil while the equipment is in operation, and can effectively filter out the sludge, glue, and acid components and precipitates in the oil, without damaging the oil quality. It is usually used along with ZJB and ZJC series vacuum oil filter.
Parameter | Type Unit | BJ-10 | BJ-20 | BJ-30 | ||||
Absorbent Capacity | Kg | 50 | 100 | 150 | ||||
Working Pressure | Mpa | ≤0.35 | ||||||
Power Supply |
| 50Hz 380V 3-Phase 4-Wire (or as requested) | ||||||
Total Power | KW | 0.55 | 0.75 | |||||
Inlet/Outlet Diameter | mm | 20/20 | ||||||
Size | Length | mm | 800 | 900 | 950 | |||
Width | mm | 600 | 700 | 800 | ||||
Height | mm | 1450 | 1600 | 1800 | ||||
|
|
|
|
|
|
|
|
|
Regenerate Transformer Oil Technical Indexes | |
Acid Value | ≤0.03mgKOH/g |
Closed Flashing Point | ≥140 |
PH Value | ≥5.4 |
Breakdown Voltage | ≥45KV |
Dielectric Dissipation Factor | ≤0.01(90) |
Filtering Accuracy | ≤5µm |
Oil Appearance | Faint yellow and transparence |
Regenerate Turbine Oil Technical Indexes | |
Acid Value | ≤0.03mgKOH/g |
Viscosity | 20% deviation from new oil |
Demulsibility | ≤15min |
Open Flashing Point | Not lower than 15conparison to new oil |
Water Content | ≤100ppm |
Filtering Accuracy | ≤5µm |
Oil Appearance | Faint yellow and transparence |
