Features
RF wireless, no direction
Self-learning, no interference
Technical data
Model: RF-66S
Working frequency: 433.92MHz
Working voltage: DC3V LR8D425
Remote distance: max 50m
Warranty: 1 year
Installation
- Open the battery compartment by sliding its cover off
- Insert a LR8D425 battery: mind the + and –
- Close the compartment by sliding the cover back in its place
- Stick double-sides adhesive on back of device to fixed on the wall.
- Or remove the panel, mounting the device to wall with screw, then cover the panel.
Use remote control to control switches
- Press panel upon/down to turn on/off switch
Tips
- The transmission distance decreases, if the signal needs to go through floors and walls.
- Multiple switches can be controlled by the same buttons on the remote control.
- Metal housings will have a negative influence in the transmission distance.
- In case of power failure or moving the transmitter, the memory still contains the code.
- Delete code: keep the learn button pressed until the LED starts flashing. Release the button and press it again for approximately 6 seconds. All information saved in this receiver is now deleted.
Safety and maintenance instruction
- Make sure that all electric connections and connection cables meet the pertaining regulations and are in conformity with the operating instruction.
- Do not overload electrical outlets or extension cords, fire or electric shocks can be the result.
- Please contact an expert in case you have any doubts about the mode of operation, the safety or connecting the appliances.
- Keep all parts away from young children’s reach.
- Do not store this item on wet, very cold or warm places, this can damage the electronic circuit boards.
- Avoid dropping or shocks, this can damage the electronic boards.
- Never replace damaged power cables yourself! In such case, remove them from the net and take the devices to a workshop.
- Wireless system are subject to interference from cordless phones, microwaves, and other wireless devices during installation and operation.
Maintenance
The devices are maintenance-free, so never open them. The guarantee becomes void when you open the appliance. Only clean the outside of the devices with a soft, dry cloth or a brush. Prior to cleaning, remove the devices from all voltage sources.
NOTE
Do not use any carboxylic cleaning agents or petrol, alcohol or similar. These will attack the surface of devices. Besides, the vapors are hazardous to your health and explosive. Do not use any sharp edged tools, screw drivers, metal brushes or similar for cleaning.