Specifications
Outdoor DOCSIS3.0 CMTS , added more RF port in order to connect current optical equipment.It is Chassis cooling mode, no fan rain-proof design, mute operation. The data port can connect upward to Ethernet and EPON. As to RF port, there are 4 TV IN for connecting TV signals from the optical receiver while other 4 RF OUT for connecting coaxial cable network.
The Outdoor CMTS forward lead the data signal and tv signal mixture from the machine room to optical node, narrowed the upstream funnel and reduced the noise interference accordingly. It can rapidly cover and connect all users without reconstructing original optical network structure.
2. Block Diagram & Pictures
1) Functional Block Diagram
TYPE Ⅰ: Independent DS/US Ports
TYPE Ⅱ: Combined 4/2 Output Ports
TYPE Ⅲ: 4 Input & 4 OutputPorts
2) Appearances
3) External Structure
3. Features
- Compatible with DOCSIS3.0, C-DOCSIS standard, work with all cable modem based on DOCSIS, support both EURO DOCSIS and DOCSIS.
- 16 DS channels bound, 64/256/1024QAM modulation mode optional. Data rate could reach up to 1.1Gbps@1024QAM.
- 4 US channels bound, could be configured to QPSK, 3-8 grade QAM mode, data rate could reach up to 160Mbps.
- Flexible on channels bound quantity set for convenient use of channel resource
- Layer 3 routing functions, support static route, VLAN,NAT and DHCP relay agent
- There are 1000M RJ45 port and SFP on data port which could be connected to not only EPON’s ONU but also Ethernet via optical port
- There are a variety of RF interfaces which could be adapted to all kinds of optical nodes connection.
- Built-in DHCP/TFTP server, support PPPoE.
- Load balancing.
- Support IPV6, multicast.
- Qos based on service flow ensures bandwidth needs for various services.
- Ensure network transmit safety via various kinds of methods such as BPI+, CM identification, anti-DOS attack , user isolation and IP source checking .
- Real time upstream spectral analysis function which helps to check US channel signal and noise status.
- Support three management ways: CLI after log in via serial port or by telnet; Remote log in embed web NMS; External NMS server based on SNMP protocols which run windows OS.
4. Typical Application
1) HFC+Ethernet Application
2) HFC+EPON Application
5. Several Connection Ways of Outdoor CMTS on Optical Node
1) Type Ⅰ
Independent DS/US Ports
This mode is suitable for having optical receiver(or the light station) of reserving descending input port and uplink output port.
Advantage: the least cable change, the minimum cost, no affection on output level.
Disadvantage: for the requirements of the optical receiver or the light station.
2) Type Ⅱ
Combined 4/2 Output Ports Type
It’s suitable to retain the original optical receiver, but there is no reserving upstream and downstream port.
Advantage: retain the original optical receiver, but do not waste existing resources.
Disadvantage: the cable change a lot, so that bring the insertion loss of 1-4dB for output level.
3) Type Ⅲ
4 Input & 4 OutputPorts
Smile the type Ⅱ, but the cable connection is simpler, more intuitive, less change.
6. Specification
DOCSIS Parameter | Downstream | Upstream | ||||||||||||||
Euro DOCSIS | DOCSIS | |||||||||||||||
Modulation Mode | 64QAM/256QAM/1024QAM | 256QAM/64QAM/32QAM/16QAM/8QAM/QPSK | ||||||||||||||
Frequency range (MHz) | 112~858 adjustable | 91~1000 adjustable | 5~65/42(optional) | |||||||||||||
Single channel bandwidth (MHz) | 8 | 6 | Single channel bandwidth (MHz) | 6.4 | 3.2 | 1.6 | ||||||||||
Binding channel quantity | 16 | 4 | ||||||||||||||
Max.total data bandwidth (Mbps) | 1100 | 857 | 160 | |||||||||||||
Single channel data rate (Mbps) | 64QAM | 41 | 27 | Single channel data rate (Mbps) | 256QAM | 40.96 | 20.48 | 10.24 | ||||||||
128QAM | 35.84 | 17.92 | 8.96 | |||||||||||||
256QAM | 55 | 38 | 64QAM | 30.72 | 15.36 | 7.68 | ||||||||||
32QAM | 25.60 | 12.80 | 6.40 | |||||||||||||
Output level (dBmV) | 45~55 adjustable 1dB Step | 16QAM | 20.48 | 10.24 | 5.12 | |||||||||||
8QAM | 15.36 | 7.68 | 3.84 | |||||||||||||
QPSK | 10.24 | 5.12 | 2.56 | |||||||||||||
Receiving Level (dBmV) | -1~+29 | -4~+26 | -7~+23 | |||||||||||||
Single channel baud rate (Msymps) | 64QAM | 6.952 | 5.056941 | Single channel baud rate (Msymps) | 5.12 | 2.56 | 1.28 | |||||||||
256QAM | 6.952 | 5.360537 | ||||||||||||||
Supported protocols | Euro-DOCSIS/DOCSIS3.0/2.0,TCP/IP,ARP,RIPv2,ICMP,VLAN,multicast,OSPF,DHCP,TFTP,SNMP,PPPoE,DHCP relay agent,Telnet,etc. | |||||||||||||||
RF Port Parameter | Number of RF Ports | Level(dBmV) | Insert Loss(dB) | Remarks | ||||||||||||
US | DS | US | DS | |||||||||||||
Independent DS/US Ports Type | 2 | 0 | 64 | / | / | DS=64@single channel maximum output | ||||||||||
Combined 4/2 Output Ports Type | 4 | 8 | 56 | / | / | |||||||||||
4 Input & 4 Output Ports Type | 8 | 18 | 45 | / | 1.5 | |||||||||||
Flatness(dB) | ±1.0 | |||||||||||||||
Impedance(Ω) | 75 | |||||||||||||||
Return Loss(dB) | > 14 | |||||||||||||||
Miscellaneous | ||||||||||||||||
IP Interface | 1000M SFP(SC/APC) | Power Supply | AC60V/220V | |||||||||||||
1000M RJ45 | Power Consumption | < 48W | ||||||||||||||
RF Ports | F-Type(Metric) | Net Weight | 8Kg | |||||||||||||
Console Interface | COM(RJ45) | Environment | Tempreture-20~55℃;Humidity10~<90% | |||||||||||||
Protection Levels | IP65 | Size(L×W×H) | 410×250×170mm | |||||||||||||
7. Order Information
No. | Name | Model | Description | Remarks |
1 | Type Ⅰ | JH-F3146-Ⅰ | Independent DS/US Ports | Pls confirm power supply type before order: AC220V or AC60V by Coaxial Cable |
2 | Type Ⅱ | JH-F3146-Ⅱ | Combined 4/2 Output Ports Type | |
3 | Type Ⅲ | JH-F3146-Ⅲ | 4 Input & 4 Output Ports | |
4 | Fiber transceiver | SFP | Customizable |
|
Jinghong reserves the final explanatio