Injector plays an important role in the modern livestock house,with its help,your work is getting more efficient and easy.An injector includes injector pipe and injector clamp. Injector clamp is a lever; the piston on the injector can be pressed easily to achieve injection function.
The catheter of injector is designed for convenience to animal injection. The injector needle is provided with scales to measure the volume of the injection liquid medicine. The simple structure of utility model has advantages of easy operation, time saving and labor saving when injecting pigs and other animals. All these reduce the difficulties veterinary staff faces and controls the amount of the liquid.
The characteristics and advantages of our product:
1. Excellent workmanship
- The product has good sealing property, avoid wasting medicine
- After meticulous grinding process plus high quality material, it has anti - oil, corrosion-resistance functions
- The needle is designed with Luer lock, needle will never fall off in process of injection.
2. Best humanization design
- Reasonable design, light structure, long working life is in accordance with the design of human body.
- Optimized design touch, make injection more light and convenient.
3. Saving time and labor cost
- The product is precise in structure and good in absorbency. Once connecting, it’s unnecessary to replace the liquid medicine repeatedly in order to realize continuous injection, being convenient without complicated replacement steps.
- Cleaning and disinfection are convenient and easy to preserve.
- Product can be extended the service life with sets of extra fittings.
Disinfectant Methods
After filled with water, boil the injector in water for 10 minutes (do not touch the bottom of the pot). Please drain the water from the injector before using it.
Application methods
1. The suction needle and the air relief needle are respectively inserted into the medicine bottle; connect the suction needle and the connector by catheter.
2. Rotate the regulating screw 10 to 1-5ml at any position (The high side of the window aligns with the scale on the ruler 8). The injector can be pushed continuously until the liquid is filled and then transferred to the required dose position. Lock cap 9 and it can be used.
Maintenance Methods
After using, clean the injector with clean hot water repeatedly inhaling and draining until no residual liquid in the injector. Wipe the injector surface, put it in the box and store it in the dry place.
Attention
1. When the injector placed for a long time, there may be no inhalation phenomenon, because the rubber valve 4 and connector 5 or the rubber valve 4 and cavity 6 stick together, separating them can solve the problem. If there is still no inhalation, there may be dirt in the rubber valve 4, please clean up.
2. After long-term use of the injector, plunger may be return slowly; you can apply inside of the injector or on O-type ring with a little vegetable oil or change a new O-type ring.
3. When cleaning or replacing parts, the seals should be tightened and without leakage
Installation of accessories
1 Suction needle
1 Air relief needle,
1 Catheter
1 Accessory bag
No. | Parts | No. | Parts |
1 | Lock Pole | 6 | Injector Cavity |
2 | Seal Ring | 7 | O-type Ring |
3 | Lock Spring | 8 | Ruler |
4 | Rubber Valve | 9 | Locking Cap |
5 | Connector | 10 | Regulating Screw |
carton box