Electric Auma Actuato /Auma Electric Actuator
Temperature of Media:Pressure
Media:Water, Oil, Gas
Power:Electric
Material:Stainless Steel
Pressure:Medium Pressure
Features of the introduced series
The introduced new generation of intelligent model
Cut-off signal protection
Over-torque of two- way protecting function
Auto switch function
The pros and cons of switch function
Dynamic braking
Servo-motor with double protection and high-efficiency
Stronger anti-interference function
Demonstration: OA-10/ voltage travel time mounted model control model
Supply voltage: K: 220VAC, F: 380VAC,
Travel time: Sees the table
Mounted model: Z: Direct-mounted, H: Foot-plate,
Control model: L: Two types, switch, switch quantity input, abbreviation: Integral-model and proportional modulating type, 4---20mA input
S: Separated-model and proportional modulating type, 4---20mA input
Y: Remote-control type, the switch quantity input
The main technical parameters of the electric actuator
The following technical parameters are mainly applied to the proportional modulating type electric actuator. Item1, 2, 3, 4, 5and 6 are not suitable for the remote-control type electric actuator and switch type electric actuator.
1. The input signal: 4--20mA DC
2. The input resistance: 250 ohm
3. Input passage: 1
4. Basic error: 1%, 2.5%
5. Deviation: 1.5%
6. Deadline: 0.5%--3% continuously adjustable
(according to the indication of system)
7. Damping characteristic: No-oscillating
8. Power supply: Three-phase 380V~50Hz, single-phase 220V~50Hz for selected
9. Working conditions: Temperature: Integral-type -10-- +55, separate-type -25 -- +70
Humidity: ≤ 85%The surrounding air does not have the corrosive elements
10. Protection rank: It conforms to the IEC145 IP65 standards. (Excluding the separate-type GAMX with waterproofing and dustproof functions fixed in rooms), bus type and intelligent type IP67.
11. The cut-off signal protection: It can be divided into all-on, all-off and home position according to your instructions.
Generally it is set into the home position when it is manufactured
SD series type | BELL series type (with liquid crystal display) | Torque Nm | Travel time S/90degree | Rated output KW |
OA10 | BELL-10 | 100 | 25 | 0.025 |
AS25 | BELL-25 | 250 | 30 | 0.065 |
BS60 | BELL-60 | 600 | 30 | 0.16 |
A+RS100 | BELL-100 | 1000 | 48 | 0.25 |
B+RS160 | BELL-160 | 1600 | 40 | 0.25,0.4 |
B+RS250 | BELL-250 | 2500 | 40 | 0.65,0.4 |
B+RS400 | BELL-400 | 4000 | 65 | 0.4,0.65,1.0 |
B+RS600 | BELL-600 | 6000 | 105 | 0.4,0.65,1.0 |
B+RS800 | BELL-800 | 8000 | 105 | 1.0 |
B+RS1000 | BELL-1000 | 10000 | 105 | 1.1 |
B+RS1200 | BELL-1200 | 12000 | 105 | 1.2 |
Specification
Pattern: | Two-port two-position | |||
Principium: | direct acting type | |||
Control mode: | normally close | |||
Valve body: | brass | |||
Diaphragm material: | NBR: ≤80°C ,FKM≤150°C | |||
Working pressure: | 0~10bar | |||
Max pressure: | 10bar | |||
Voltage: | AC220V AC110V DC12V DC24V | |||
Medium: | Air ,water ,Liquid ,oil ect. | |||
Application: | Gas protection welder, various types of burners, test equipment small-flow air water control system |
Model | Pipe | Orifice Diameter(mm) | Principium | CV | Body material | Seal | Work Pressure |
MI-03 | 1/8" 1/4" | 3 | direct acting | 0.3 | Brass , SS304 | NBR,FKM | 0-13bar |
MI-04 | 3/8" | 4 | 0.58 | NBR,FKM | 0-7bar | ||
MI-05 | 1/2" | 5 | 0.65 | NBR,FKM | 0-5bar | ||
MI-08 | 1/2" | 8 | 1.2 | NBR,FKM | 0-1bar |
Dimensions
(mm)
Orifice(mm) | A | B | C |
DN3 | 44 | 25 | 80 |
DN4 | 44 | 25 | 80 |
DN5 | 50 | 25 | 80 |
DN8 | 50 | 25 | 80 |
Materials of construction | |||
Parts in contact with the medium | |||
Valve of body | Brass | SS304 | |
Seals | NBR ,EPDM ,FKM | ||
Magnetic isolation pipe | SS304 | ||
Core | Stainless steel alloy | ||
Spring | SS304 | ||
The shading | Copper |
Picture
small brass and plastic non return valves solenoid gas valve
- Inner packing: opp bag, then carton box for each product
- Outer packing: export standard carton, Foam outside protecting the goods against damage
- Usually we ship your order by sea or by air...
- We do our best to ship your order within 1 week after receiving your payment
- We'll tell you the tracking number once your order has been sent
- We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal
- We have more than 12 years experience in solenoid valves
- Excellent quality control is one of our main principles
- Various style for each products and completely series pneumatic products for you to choose from
- Sample order & small quantity order is ok
- We provide OEM service, accept customer label, develop the product with your drawings or samples
- Any question, will be replyed within 24 hours
Founded in July,2014, Ningbo Fenghua GO GO Automatic company is a high-tech enterprise with all vitality, potential and comprehensive strength. The company is located in the Zhejiang Ningbo Science &Technology zone, a unique place with beautiful scenery and gifts of nature.
Main products of our company : automatic parts, pneumatic solenoid valve, air water solenoid valve, hydraulic valves, gear piston or vane pumps, fittings connectors, temperature pressure transmitter, temperature controller, PLC, DCS parts, hardware stainless steel or brass or plastic parts , etc.
Since its foundation, the company keeps living up to the belief of :"honest selling, best quality, people-orientation and benefits to customers. " We are doing everything to offer our customers with best services and best products. We promise that we'll be responsible all the way to the end once our services begin.
Q: What is your main market?
A: Our main market is north America, especially USA.
Q: Are you products standard?
A: Our model is standard, if you have specific demand, pls tell us.
Q: Do you have interest to do our own design items?
A: Absolutely! We have big interest.
Q: How to make the order?
A: You can send us email or inquiry at alibaba directly. for samples order, you can go to our aliexpress shop and place the order.
solenoid gas valve
Skype:atcgogo