Beigao strainers are suitable for use in a variety of fluid systems such as air, chemical, gas, oil or water lines ect. for the protection of valves, pumps, compressors and other equipment.
Woven Wire Type
Woven Wire mesh screens are available in both lined and unlined types. Most the Mesh screens require a perforated screen to support a fine wire cloth. This design is very widely used in higher pressure size Y strainer. Unsupported mesh screens are aviable for lower pressures. Service.
Perforated type
Hole sizes range from 0.20" to 1/2" as standard.
Thickness
Standard gauge of screen material ranges from 22 to 11 depending on hole size. Special thicknesses for drilled holes are available. Perforated metal should be no smaller than 1/2 the metal thickness. Perforated screens are easy to clean. Less susceptible to Cloggng than the mesh design.
Wire Mesh Size
Screen Cleanning
A Y-strainer screen can be cleaned by removing the plug in the bushing, copor bolted cover allowing the straier to drain the loose material inside the screen. If a blow-off valve is connected to the strainer it can be opened to achieve the same result as the above. The Y-strainer screen can also be cleaned by removing the bushing, cap or cover to access the screen element.
Care should be taken in cleaning screens. After removing a screen, it should be soaked in a cleaning solution or cleaned by using a brush. Do not allow trapped meterial the screen to harden, as it will be difficult to remove. A regular cleaning schedule is recommended to avoid screens from becoming clogged.
Cast Iron Y-type Strainer PN16 Flange End with Favorable Price Cast Iron Y-type Strainer PN16 Flange End with Favorable Price
Factory
Workshop
Our Workshop
Warehouse
Our Warehouse
Team
Our Team
Packing Details : Plastic Bag+Paper Box+Plywood Case
Shipping Details : By Sea / By Air / By Train / By Express
CE / ISO9001 / ISO14001 / OHSAS18001
1. Are you trading company or manufacturer?
We are manufacturer. We can control every production process, and deal with client's any problem at first time.
2. Where your factory located? Can we visit your factory?
We have two factories. One located in Beijing City, China; another located in Cangzhou City, Hebei Province, China.
We always welcome you to visit our company and factories. Please let's know your schedule, we will arrange to pick up you and visit our factory.
3. Can I get sample from your factory?
Of course. Please give us your related requirement. We will arrange sample for you according to your requirement.
4. Can I cast (or print) our brand and mark on the valve body?
Definitely! Please provide us your mark picture and brand. We will cast (or print) on the valve body and do your nameplate as your requirement.
5. Can you manufacturer different standards valves according to customers requirement?
Yes, we can manufacture valves according to GB, JB, DIN, JIS, API, ANSI, BS and so on and also we can manufacture according to customer's demand and requirement.
6. What is your standard packing?
The goods will wrapped with plastic film, then putted in paper box, then plywood case and loaded with pallets. Of course, special packing method can be accepted when needed.
7. How about the warranty?
The warranty time is 12 months. We can repair or change the valve if there have quality problem.
Cast Iron Y-type Strainer PN16 Flange End with Favorable Price Cast Iron Y-type Strainer PN16 Flange End with Favorable Price