Specifications
1.Plastic Solenoid Valve2.Solenoid Valve
3.Electric Solenoid Valve
4.Solenoids
5.Normally Open Solenoid Valve
Plastic Solenoid Valve for Drinking Fountains AC220V, DC24V
, Electrical Specifications
1. Used in required voltage range
AC 110V AC220V
± 10% used in this range
DC 12V DC24V
2. The coil insulation's Class is H high moisture resistant type,
Processing by high-temperature varnish dipping.
3. Coil continuously energized maximum temperature rise to 92 degree
4. Fluid temperature range
2W, SLDE, 2V, JO11SA, VX, DF(ZCS) Type use from -5~90 degree
2WL is high gradient Type use from -5~150 degree
2L(US), ZCZ, ZQDF is Steam high temperature type use from -5~185 degree
, The plumbing note:
1. With the solenoid valve of pipe fittings, be sure to clear all the debris in the pipe and to install the filter
2. Follow the correct plumbing construction and installation ( Figure 1)
3. Vapor (US type) use solenoid valve, Please vertical use (Figure 2)
4. Used in Gas, Vacuum, heavy oil and corrosive fluids to be subject to ordered
5. Normally open (NO type) 3-way Type be subject to ordered
6. Usually use pressure is 0-8kgf/cm, and other use of pressure to be ordered