water-mixing temperature control center

Specifications

water-mixing temperature control center.

the principle of this system is that throught the mixing the cold and returning hot water with suppliying high temperature water under the intelligent controller device to reach the set water temperature in underfloor heating system less than 60 degree.

technical data:

1, Controlling scope of indoor temperature: 5-50(±1)
2, Controlling scope of underfloor heating system: 5-70 degree (setting of leave factory 45degree)
3, Mix water temperature control precision:0.5--3(setting of leave factory 0.5degree)
4, Recycle pump head: 6m
5, Voltage: AC220V
6, Max power: 100W (pump is running)
7, Nominal pressure: PN10 

8, Max water temperature:less than 95 degree

9. Suitable for the room less than 200 square meters.

advantage:

1, This system will decrease the energy consumption dramatically due to its precise temperature control system.

2, Programmable thermostat, controlling the temperature of indoor and underfloor heating at the same time precisely.

3, When the temperature of the pipe was detected below 30 degree,the pump will stop working automatically.

main components:

1, Recycle pump with temperature controller Programmable
2, Water temperature detection

3, Three-way valve

4 , Electric actuator