Specifications
Relief Valve cracking pressure from 50psi to 6000psi, for liquid or gas service, materal ss316, various end connectionsRelief Valve
Introduction
Valves open when system pressure reaches the set pressure. Then the medium flow out to release system pressure. Valves close when the system pressure is lower than the set presure.
The opening height and the system pressure are direct proportional. However, there's no limit for relieving capacity. So valves in this series should be selected carefully according to system requirements.
Features
1.Set pressures:50~6000PSI @70°F (0.34 to 41.4Mpa @21°C)
2.Maximum outlet pressures:1500PSIG(103bar)
3.Working temperatures:-10 °F to 300 °F (-23 °C to 148 °C )
4.Many options for various end connections
5.Liquid or gas service
6.Adjustable bonnet cap, and adjustable set pressure
7.Balance stem design to eliminate the effect of system back pressure
8.7 color-coded springs available for a wide range of set pressure
9.Many options for various seal materials
10.Label identifies the set pressure range
11.Manual override handle available to open the valve without changing
the set pressure when lower than 1500psi
