Principle:
Typically in heat water system, when entering water temperature is below Thermal Circuit-Control set point, the thermal actuator will begin to open the valve to establish a flow rate that will achieve
set point. If the water temperature exceeds the set point, the valve will begin to throttle back to find the
current equilibrium point. Continuously operating at the optimum temperature minimizes system heat-loss thereby saving energy.
SELF-ACTUATOR (open/close): NO ELECTRICAL POWER, NO MANUAL WORK!
Function:
This constant, automatic response to water temperature enables each hot water branch to quickly and
consistently deliver the right temperature of hot water to each connected fixture.
SINGLE CONTINUOUS DOMESTIC HOT WATER SUPPLY LOOP (NO BRANCHES)
MULTI-BRANCH DOMESTIC HOT WATER SYSTEM
BUILDINGS WITH WIDELY SPACED RANDOM FIXTURE LOCATIONS
Model |
Port Size | Maximum Operating Temperature | Maximum Operating Pressure | Dimension | Net Weight | Flow Rate (Cv) | ||||
°C | °F | MPa | PSI | mm | Inch | g | lb | |||
TCC-0.5 | 1/2”NPT | 130 | 266 | 1.4 | 203 | Φ29*72 | 1.14*1.14*2.83 | 272 | 0.60 | 1.2 |
TCC-0.75 | 3/4”NPT | 130 | 266 | 1.4 | 203 | Φ35*80 | 1.38*1.38*3.15 | 318 | 0.70 | 1.7 |
TCC-1 | 1” NPT | 130 | 266 | 1.4 | 203 | Φ44*86 | 1.73*1.73*3.39 | 726 | 1.60 | 3.2 |
TCC-1.25 | 1-1/4”NPT | 130 | 266 | 1.4 | 203 | Φ54*119 | 2.13*2.13*4.69 | 1225 | 2.70 | 5.0 |
TCC-1.5 | 1-1/2”NPT | 130 | 266 | 1.4 | 203 | Φ60*119 | 2.36*2.36*4.69 | 1724 | 3.80 | 7.5 |
TCC-2 | 2 “NPT | 130 | 266 | 1.4 | 203 | Φ76*124 | 2.99*2.99*4.88 | 2540 | 5.60 | 14.0 |
Standard Temperature: 37°C, 45°C, 60°C
Special Temperature Available
Production
Exhibition
Visitor
- Only one Chinese manufacturer reaches to American performance.
- Reasonable policy to support distributor.
- Professional technical support from pre-sale to after-sale.