It's a vacuum cup, also a NFC speaker, Bluetooth Speaker, WiFi speaker.
This mini speaker has two versions :
Bluetooth version ( Model N9000-A),
NFC Edition ( Model N9000-NFC);
*Only NFC Edition ( Model N9000-NFC) NFC related functions can be achieved , please check your purchase of the product model and product label on the bottom :
Features
[ Bluetooth audio ] Bluetooth3.0, maximum receiving distance of 10 meters .
[ Bluetooth phone ] voice clarity, no echo .
[ Audio Output ] fidelity, subwoofer output , output volume larger.
[ Control ] human touch sensing
[NFC] with NFC-enabled speakers near the top of the key part of the terminal to automatically connect . (N9000-NFC only with this feature )
[ Power and memory ] automatically remembers the last volume.
[ Active connection ] to open the Bluetooth speakers, active connection last connected device.
[ Built-in battery ] Built-in rechargeable lithium battery, environmental protection , energy saving, practical.
[ Long working ] once fully charged, more than 6 hours of continuous playback .
[ Long standby ] once fully charged, it can even stand more than 60 days .
The product key functional definition ( to prevail in kind )
1. [ON / OFF]: Power switch ; long press on the front panel ON / OFF button for speaker startup and shutdown state switching . And with a corresponding tone and status indicators.
2. [O / PLAY]: Play / Pause / Answer / Hang up the phone mode conversion .
Short press : Bluetooth mode to play / pause , press to answer the phone call , call , short press to hang up.
Long press: press 3 seconds to control the phone dialing, voice dialing machine enters Andrews .
3 [ - ] : adjust the volume of small / previous one . Short press : the upper one ; Long press: to adjust the volume decreases.
4 [ + ] : volume adjustment Large / next one . Short press : for the next one ; Long press: to adjust the volume increases.
5. [MIC]: Call microphone ; call is a call on the microphone can enhance the effect . ( This can not write )
6.NFC Connection: close to the top of the 30MM, automatic connection , issue ding-dong sound ; close again automatically when disconnected.
Indicator Description
Red light: is charging , fully charged, lights off automatically .
Blue light: Indicates Bluetooth normal operating mode ; low -power shutdown indicator .
Fourth, the Bluetooth connection method ( Optional models , to prevail in kind ) :
1 , often press the power button will issue a " Gululu " sound, then continue normally press the power button until the red and blue LED indicator switches , speakers into Bluetooth pairing mode.
Or press the mode button to switch to enter Bluetooth mode ( this does not know how to describe )
2, open mobile devices ( cell phones, computers , etc. ) of the Bluetooth function, search for Bluetooth devices "N9000".
3 , manual clicks, the device automatically paired , connection, the connection is successful will issue a "grunt " sound .
( Under normal circumstances do not enter a password, special models prompted to enter a password , enter "0000 " can be )
4 , have been successfully paired devices , open the opportunity to automatically connect to the next .
5 , if we already have a Bluetooth device connected to the same speaker , need to switch to another Bluetooth device to connect with speakers , this time need ( you add how operations )
Note : Enter Bluetooth mode within 10 seconds , the Bluetooth device will automatically find and pair connection 10 seconds after going through the manual connection.
5 , volume control : Press [ - ] key to decrease the volume , press [ + ] button to increase the volume. ( Above have spoken )
Charge Method
Plug the power cord into the unit's [USB] jack and the other end of the USB into the computer's USB port, or connect the charger interface standard 5V 500mA , the charge of " Red Light" , full of " red light" off. The machine built overcharge protection circuit can be connected to a computer or charge for a long time , about three hours to fully charge the battery ; battery life every time the volume due to the use of time varies .
Low Battery
When the battery low occurs , the system will automatically shut down , then please charge ; if the machine is not used for a long time , at least once a month charge , you can protect the battery to extend battery life.
NOTE
non- Bluetooth audio cup head soaked , try to use a wet cloth to clean wrung Bluetooth speaker parts ; water if not careful , please promptly after the power off and dry it .
Technical specifications
Supported models ; Android 4.2.2, IPHONE5
Output Power: 3W Working Voltage : 3.7V
Frequency Response : 100Hz-18KHz
SNR : ≥ 80dBA
Distortion: <1%
Audio input: Bluetooth, Computer
Support MP3: bit rate , 32Kbps-320Kbps
Speaker Unit : 52mm, double magnetism, 16 core , 4Ω
Input Power : Built-in polymer rechargeable battery or external DC5V 600mAh 3.7V
Adjusting: buttons adjust input sensitivity : 450 ± 50mV
Troubleshooting
1, Q: boot automatically shut down ?
A: battery , please charge , recommended charging two hours before use.
2, Q: Play flash blue lights have been shut down or restart automatically after ?
A: battery , please charge , recommended charging two hours before use.
3, Q: can not be charged ?
A: Please check the power and charging cable, and make sure the access charge 5V input voltage is normal .
4, Q: when charging red light does not light or red light is dark ?
A: normal phenomenon . If the battery is fully charged or fast full, the red charging indicator may not light or dark.
5, Q: No sound speakers ?
A: OK in the Bluetooth mode and the device audio and speaker audio connection is working , and check the two paired device volume .
6, Q: Bluetooth will not automatically connect ?
A: 1, only the success of paired devices into an effective working range Bluetooth speaker will connect automatically.
2 , Please check with another Bluetooth speaker now has the device is kept connected.
3 , check whether your own Bluetooth is turned on and working properly.
7, Q: Bluetooth no sound ?
A: 1, make sure that Bluetooth is connected successfully .
2 , make sure that the two paired Bluetooth devices or the volume is turned to minimum .
8, Q: button no function ?
A: 1, check the Bluetooth speaker power has power.
2 , check whether the Bluetooth speakers in the boot state.
9, Q; Bluetooth stereo cup head after the water how to do ?
A: 1, if switched on, immediately shut down , do not energized , the available hair dryer before use.
2, if in the off state , please do not energized , the available hair dryer before use.
Packaging Includes:
Bluetooth cup head x1 ,
the data line x1 ,
Manual x1,
certificate x1.
Precautions
In order to properly use the player the user to ensure that players with good performance , please carefully read and follow :
Do not severely impact the host.l
Do not touch benzene, thinner or other chemicals .l
Do not go near a strong magnetic field , electric field .l
Please avoid direct sunlight or heating appliances .l
Do not disassemble , repair, or modification .l
Do not listen to the maximum volume , so as to avoid adverse effects on hearing .l
packaging waste , batteries, used electronic products, please classification properly handled.l
Do not place the Bluetooth audio cup head soaked .l
To make it easy for you to experience products, we are equipped with detailed instructions for use , which you can get information about the product introduction , usage and other aspects of knowledge , when you use the machine read the instructions carefully before , if typographical errors or translation hope customers understand mistakes .