Specifications
outdoor base ups
1. IP43 Level
2. Pure sine wave output
3. Optional line interactive and online type
4. Inside battery
Outdoor UPS Pure Sine Wave IP43 Line Interactive outdoor ups
HW series UPS is a smart multifunctional line interactive ups, consisting of inverters, automatic voltage regulator, conversion circuit, main control circuit and display alarm circuits, etc. designed to protect your computer and other important electronic equipment from power failure, brownouts, sags and surges. The ups can filter out the small voltage fluctuations, when meeting big voltage disturbance, ups can disconnect AC input by ups internal circuit, so that avoid influencing your equipment. UPS can offer uninterruptible power supply by lead acid battery or lithium battery until the utility power recover normally. when the utility power is normal, UPS has voltage regulation function by internal automatic voltage regulator. meantime charge the battery. When the utility power is abnormal, ups can change the battery energy into pure sine wave AC power, make the load work.
Apply to Computer center, Network management center, Communication system, Automatic control system (Data Center), Precision instrument and equipment (Industry), household appliances, outdoor communication station (Power Plant).
Main Features
1. Online interactive mode design: high-efficiency, high-power charging.
2. Adaptive output frequency adjustment: By automatically tracking the input frequency, adjust the battery inverter output frequency, when just Battery inverter without utility power, can switch the output frequency via ups front panel.
3. Intelligent interactive regulator: Relay fast interactive switch, with wide input voltage range, improve the output voltage regulation accuracy.
4. Intelligent digital control technology: Adopts 32-bit high-speed micro-controller circuit control, parameter setting, operation management, advanced self-test and self-detection feature, can self-test and fault analysis all the independent circuit on the circuit board to perform a self-test and fault analysis. Adopt SPWM conversion technology, pure sine wave output to meet your needs.
5. Efficient inverter technology: Adopt ultra-low internal resistance power MOSFET as a power conversion switch, make the work efficiency of the inverter higher, make the performance more stable and reliable.
6. Perfect protection features: input voltage, frequency overrun protection, surge voltage protection, over-current protection, output short circuit protection, over temperature protection, battery overcharge and over discharge protection.
7. Intuitive LED status indicator: the workflow type status indication at a glance.
8. Humane screen dynamic LCD display: the operational status and data visual display, multiscreen data query.
9. Output no-load protection function: when the battery inverter work, if the output load is very small, five minutes will automatically shut down-load protection.
10. High-performance dynamic characteristics: a variety of feedback control using the the instantaneous control mode and rms, both to achieve a high dynamic adjustment, but also reduce the distortion of the output voltage.
11. Intelligent battery management: three-stage intelligent battery charging, automatic battery powered environment are charging and float conversion, temperature compensated charging, discharge management to extend battery life and reduce the burden on the administrator.
12. Intelligent detection function: the system microprocessor from time to time for all the power state, breaker status, fuse status and all the circuit work state line detection, if any fault protection and alarm to notify the administrator immediately.
| Rated Capacity(VA) | 500VA | 750VA | 1000VA | 1200VA | 1500VA | 2000VA | 3000VA | 4000VA | 5000VA |
| Output voltage(W) | Rated Capacity*0.8 | ||||||||
| Work mode | Low frequency online interactive | ||||||||
| Phase | Single phase(L+N+G) | ||||||||
| Rated Input voltage | 100/110/115/127V;220/230/240V(According to the user's power standard) | ||||||||
| Input voltage range | ±25% | ||||||||
| Input nominal frequency | 50/60Hz (adaptive adjustment) | ||||||||
| Input voltage range | ±5% | ||||||||
| Voltage stabilizing function | Adopt Relay smart multi-geared adjusting voltage | ||||||||
| Voltage stabilizing output precision | ±5% | ||||||||
| Rated Battery Voltage | 12V/24V/48V/96V/110V/220V (12V only used for 500VA~750VA, 24V only used for 1000VA~1500VA, 48V only used for 2000VA~5000VA) | ||||||||
| Charge mode | three-stage intelligent battery charging | ||||||||
| Float charging voltage | 13.5V/27V/54V/108V/121.5V/243V | ||||||||
| Equalized charging voltage (optional) | 14.1V/28.2V/56.4V/112.8V/126.9V/253.8V | ||||||||
| Temp. Compensation voltage | 3mV/°C(cell battery) | ||||||||
| Charge power | Rated capacity*20% | ||||||||
| Output phase | Single phase (L+N+G) | ||||||||
| Nominal voltage | Equal to input rated voltage | ||||||||
| Inverter output voltage | 100/110/115/127V;220/230/240V (According to the user's power standard) | ||||||||
| Inverter voltage stability | ±1%(steady load), ±3% (fluctuation of load) | ||||||||
| Inverter frequency stability | 50Hz, 60Hz<±0. 5% | ||||||||
| Crest factor | >3:1 | ||||||||
| Inverter output waveform distortion degree | Pure sine wave, Linear load<3%; non-linear load<5% | ||||||||
| Transfer time | <5ms | ||||||||
| Overload protection | Overload level | utility power mode | Battery mode | ||||||
| 105%~125% | >10mins | >1mins | |||||||
| 125%~150% | >1mins | Immediate protection | |||||||
>150% | Immediate protection | ||||||||
| Input protection | Voltage, frequency ultra-limit protection | ||||||||
| Output protection | Over-current, short circuit protection | ||||||||
| Battery protection | Overcharge, over-discharge protection | ||||||||
| Temperature protection | Over-temperature protection | ||||||||
| Hardware fault protection | Fuse over current protection, surge voltage protection | ||||||||
| Alarm function | Audio alarm | ||||||||
| Work Environment | Temperature: 0~40°C, Relative humidity: 30%~90% , Altitude<2000m (power reduce 1% every 100M raised, 4000M utmost) | ||||||||
| Cooling method | Forced ventilation | ||||||||
| Communication interface | RS232 (optional USB, SNMP card) | ||||||||
| Protection level | IP30 | ||||||||
| Safety performance | I/O on ground resistance (3000VAC), stray current less than 3.5mA, insulation resistance exceeding 2MΩ(500VDC) | ||||||||
Main Features
1. Pure sine wave output, true on-line double conversion design.
2. Adopt 4 layers PCB, and SMD technology.
3. With the sixth generation IGBT, the working efficiency of inverter much higher and the heat dissipation better, more reliable.
4. User-friendly operation and visual parameter, optional language and logo.
5. Set the work mode on the touch screen directly, UPS mode ECO mode EPS mode.
6. Provides intelligent detection for whole process. All power’s supply working status, breaker status, and all circuits working status.
7. It is completely able to load from 0-100% while no need to change to bypass, which make sure the output reliable.
8. Cold start.
9. Generator compatible.
10. With RS232 and RS485 standard interface, optional SNMP and dry contact connection.
Package: standard wooden box package to gurantee the safety of ups.
paper box accepted too .
| Certification |
We have passed ISO9001, ISO14001, OHSMS 18001, CE, 3C, TLC and CQC certifications.
| The exhibition |
| Company information |
About us : Foshan Baykee New Energy Technology Incorporated Company
1 advanced technology
Every year we have a lot of R & D investment and R & D team have more than 50 people. We once help the latest generation of Chinese fighter aircraft, the j-20 development, and for China's high-speed rail provide products, we can provide you the world's leading technology service, and according to your needs for you to design more in line with your requirements.
2 professional services
Our company has more than ten years of production, after-sales service experience, the production of professional, professional service, to provide you with more intimate and more professional services.
3 timely and satisfactory after-sales service
We have been engaged in foreign trade for many years, the customer is our God, we do not do a one-time sale, we offer you a more intimate, more comfortable service.
1,what is the mainly product baykee produce ?
Low frequency online ups :
MP11 series :1p/1p 1kva-30kva
MP31 series :3p/1p 10kva-60kva
CHP3000series : 3p/3p 10kva-800kva
line interactive ups series
HD series : 1p/1p 1kva-10kva
high frequency online ups series
HS series :1p/1p 1kva-10kva
HTS series : 3p/1p 10kva-20kva
Outdoor ups :
HW series : 1p/1p 1kva-20kva
battery 12V 7Ah -250Ah, 2V 200Ah-1000Ah
2,Why choose us :
A:Characteristiccustomized service:
Once you have special requirement, tell us, we will make the ups as you need, OEM, print your logo, your design, all in our service
B:High Technology :
BAYKEE UPS adopts SMT technology, the fourth layer PCB and the sixth generation IGBT. It's the most advanced technology in the World. Also all our UPS with ECO, EPS, and UPS three working modes, which can be selected from the front panel, and then makes our UPS the most energy-saving one.
C:High quality :
We have pass the ISO9001 quality management system certification, ISO14001 environmental management system certification, TLC authentication, CE certificate, CB certificate, the Chinese energy conservation certification and any other series authentication, all the products are in effective quality control, excellent quality testing index, excellent quality and worth to your trust.
D:Nice price : provide competitive price to fulfill win-win cooperation model
E:Full warranty : 2years full warranty and free technical guide forever
F:Best service : if any you need, we are just here be your best friends and partner with the nice service in 7/24/365 time.
G: Full solution according to your demand:above 20enginners and sales team always service you, provide the best solution for you .birng the double -win module for our cooperation.
3,how can we cooperate with Baykee ?
Enquiry- provide -make PI - 30% advance payment -begin to produce-70% rest payment-shipping-send document for customs clearance-get the items -finish
4,how can we be the agent of baykee ?
Visit our factory -survery between customer and baykee-get the authorize letter for a agent
5. Whether to provide OEM?
We offer OEM with your trademark