Certification:PTS,NCPP,GTS
Piipe Lock Water Dispense and Pure Water Applications Push Fit Low Pressure Switch Valve
Description:
Polyformaldehyde plastic body. Suitable for water and food use. Handles pressures up to 145 psi (10 bar),bursting pressure is 435 psi(30 bar) an operating temperature range of -20 to +60 degrees C, and a vacuum capability of 750 mm Hg Meets Can be mounted on a wall or adjacent surface using staples Full port flow for higher operating efficiency than standard port Inline valve for connecting two pipes going in the same direction Push-to-connect ends for tight sealsApplications:
Spe offer the widest range of water hose connector, push-fit fittings, and push in fittings.Push fit plastic fittings are used in various applications, including radiant heating system,drinks dispense, pure water applications, reverse osmosis system, and water purification system, among others.beyond water and food use, fittings can be used with air, gases,vacuum,and liquids.and all connections can be assembled and disassembled repeatedly. a broad of sizes covers a broad scope of applications
Competitive Advantage:
SPE Low Pressure Drop. These slim, inline switches reduce pressure drop to a minimum. They incorporate a unique, dual-diameter, internal bore and piston configuration to minimize flow constriction. Liquids are able to smoothly pass around the piston and flow through the switch with little pressure loss to the down stream line.
Warning
When tighting threaded fittings,use care nor to over-torque the fitting as this may damage the fitting and cause a leak or other failure.
