Specifications
abrasive wear resistance sintered hard metal disc cutter1 speed faster
2. long tool life
3.good service
General information:
Tungsten carbide disc cutter is supplied in a range of standard sizes for wood and steel-sawing
applications.
These kinds of carbide disc cutters are specially manufactured for cutting off and slotting metal materials such as plain steel, chilled steel, aluminum and copper as well as difficult-to-machine materials such as stainless steel, titanium alloys and printed circuit board.
Our tungsten carbide disc cutters are precision made to a high standard, with specially ground finish and tooth. Compared with the high speed steel saw, it can perform high speed cutting, with a high machining efficiency, accurate slitting and good surface finish.
Advantages of our products:
1. Good toughness
2. Superior wear resistance & high strength
3. A comprehensive range of types
Grade & application for cemented carbide disc cutters with promoting price
Grade | Equal to ISO Category Number | Performance |
uses | ||
Density | Bend Strength | Hardness | |||
G/Cm3 | N/mm2 | HRA | |||
YG3 | K01 | 14.9-15.3 | ≥1180 | ≥90.5 | sand-blasting nozzlesQualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting nozzles. |
YG3X | K01 | 15.1-15.4 | ≥1300 | ≥91.5 | |
YG6X | K10 | 14.8-15.1 | ≥1560 | ≥91.0 | Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron. |
YG6A | K10 | 14.7-15.1 | ≥1580 | ≥91.0 | |
YG6 | K20 | 14.7-15.1 | ≥1670 | ≥89.5 | Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc. |
YG8 | K20-K30 | 14.6-14.9 | ≥1840 | ≥89 | Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts. |
YT15 | P10 | 11.1-11.6 | ≥1180 | ≥91.0 | Qualified for rough machining, semi-finish machining and finish machining during consecutive machining of carbon steel and alloy steel. |
YT14 | P20 | 11.2-11.8 | ≥1270 | ≥90.5 | Qualified for rough machining for rough face of carbon steel and alloy steel, half process during discontinuity cutting. |
YT5 | P30 | 12.5-13.2 | ≥1430 | ≥89.5 | Qualified for rough machining for rough face of carbon steel and alloy steel and discontinuity cutting. |
YW1 | M10 | 12.7-13.5 | ≥1180 | ≥91.5 | Qualified for finishing and semi-finishing machining of refractory steel, high manganese steel and common steel. |
YW2 | M20 | 12.5-13.2 | ≥1350 | ≥90.5 | Qualified for semi-finishing machining of refractory steel, high manganese steel and common steel. |
Types & sizes of cemented carbide disc cutters with promoting price
Zhuzhou Mingri Cemented Carbide Co., Ltd was established in 2001 with the investment of RMB 40 million. We own up-to-date production line, advanced equipment, and technicians.
We specialize in cold forging die cores, brazed tips, disc cutters, plates and boards, saw tips, round rods, rock drilling bits and buttons, milling tools, geological exploration drill tool, etc.
Our main overseas markets:
1. Europe,UK, North Europe, Russia,
2. Latin America, Brazil, America,
3. South Asia, India, South-east Asia, Japan, Taiwan, etc
Advantages of our factory are as follows:
1. Focusing on manufacturing tungsten carbide products over 13 years.
2. Specialist manufacturer equipped with advanced processing machines and over160
technicians
3. Over 50 tons/month productivity to assure sustainable supply of products
4. Owing mould workshop to design & produce moulds for nonstandard products, and with
mould stocks over 10 thousand sets for different products.
5. Full ability to accept OEM & ODM orders
6. Stringent quality control and quality consistency.
7. Professional mechanical & chemical inspecting labs to control the quality of raw material and
inspect physical & mechanical properties of finished products.
Quality of our products:
1. Mingri has been awarded ISO9001:2008 and ISO14001Environment Management
Certificate
2. Strict quality control system to make sure it can match your needs.
3. We own a factory, products manufactured by ourselves and OEM products available
according to your drawings or samples.
Packing and delivery:
1. Interior packaging: paper box interior
2. Exterior packaging: carton or wooden case
3. Other packaging upon your request
4. We also have the professional agents shipping our products to the customers.
Welcome to have a visit to our factory!
Advantages of services:
1. free technical support online
2. fast feedback on your quotation and much better after-sale services
3. cooperating with excellent express delivery companies such as DHL, EMS etc to ensure swift
delivery
4. quality and quantity assured
5. sample or trail order available
6. fluent and comfortable English speaker
Should you be interested in our products, welcome to contact me! You will surely get a satisfactory response with both speaking and writing in fluent English
Skype: sarah.zhang48
Tel: +86 731 2277 8508