tile press machine:
We are special in roll forming machine for nearly 10 years, with high quality and competitive price in China. including separated workshop for glazed roll forming machine, sandwich panel roll forming machine, C/Z purlin roll forming machine and Plastic coated workshop etc.
our products are popular in Russia, India, UK, USA, Kazakhstan, Tajikstan ,Malaysia, Nigeria, Rumania and Albania etc. more than 50 countries and region with acclaim.
We hereby sincerely invite you to visit our factory for possible deal!
tile press machine with hydraulic cutting
The tile press machine is made of dealing with galvanized steel sheets or colored steel plates or aluminum plates of different colors. The products are used to construct external roofing and wall panels of houses and interior panels or ceilings to enhance the appearance of the roof or walls. And durability. The device does not limit the length of production, according to the requirements of the construction of the computer controller to set up multiple sets of different data, one key to confirm, the equipment automatically set in accordance with the computer data to produce different lengths of finished products. The surface of the finished product produced by the device is smooth, flat, no scratches, easy to install the installation. I produced products in line with national steel construction standards. 840-type tile machine equipment advantages: low operation and maintenance costs, high dimensional accuracy of finished products, mechanical processing and stable operation, low energy consumption.
TYPE A
TYPE B
TYPE C
Corollary Equipment of tile press machine:
Decoiler: used for loading plates coil into roofing tile press machine,plz kindly contact for more details.
A.Roll forming machine
1) Number of forming steps: 9-20 steps
2) Material of shaft: 45# steel hardening and tempering treatment. Outer diameter 85mm ,total solid Tolled shafts
3) rollers: Material is high grade No.45 forged steel, with digital-controlled procession. The rollers are plated with hard chrome with thickness of 0.05mm on the surface after being machined by the exact machine tool. So that ensure long life of forming rollers.
4) Main motor power: 4 Kw with cyclical planetary gear speed reducer
5) The plating chromium’s thickness on the surface of rollers: 0.05mm
6) Main stand: 350# H steel welded structure Wall plate thickness: 14mm the main frame of machine is welded separately and the outside wall is connected by screw after being rot blasted on the surface.
7) Chain and gear move the line, motor drives. All working actions are controlled by PLC electric cabinet automatically.
8) Suitable power voltage:380V/50HZ/3Phase (can de designed according to buyer’s requirement)
9) Line working speed (Forming speed):about 15-18 m/min (without cut time)
B. Hydraulic Cutting
1) Adopts post cutting, Stop to cut;
2) The cutting blade material is Cr12 with quenched treatment.
3) Adopts welded frame for good rigidity.
4) Cutting frame has been heat treatment to avoid final product deformation. cutting length tolerance ±2mm.
5) The power of cutting is provided by hydraulic station.
6) The final product can be cut as per set length in PLC controller, and the length is automatically measured by encoder. When final product reaches the set length, machine will stop to cut the Product automatically. Finish this action, machine will run again continuously.
C. Hydraulic station:
1) It supplies the Lower for the hydraulic cutter.
2) All hydraulic accessories are all use Chinese famous brand products.
3) Hydraulic motor power: 3KW
D. PLC Control System:
1) This system uses Delta PLC to control the all working actions. Production quantity and each piece length will be automatically measured. It is convenient to control the roll forming machine.
2) Delta converter adjusts speed technology, realize the automatic production.
3) Text screen is input and cancelled the working data.
4) Friendly man-machine interface system can be set batches to the work piece, length, quantity, etc.
5) Encoder count, having function of count and measuring length.
6) Suitable power voltage:380V/50HZ/3Phase (can de designed according to buyer’s requirement)
Loading into container:
When the dimension of roofing tile press machine is small,the machine will be fixed and reforcement into container.
Packaging:
Nude & Bulk packing for container loading,the completely machine with undisassembly
Brief Introduction of our company:
We are a professional manufacturer of automatic Tile press machine. We have been manufacturing machines for some Top Building Groups from Spain, Norwegian, Korea, Thailand,and Saudi Arabia since the year of 2008. Our company has got independent import and export rights. Thus, we can distribute several kinds of machine to clients globally. Some of our products have got European CE,, ISO9001:2001, ISO13485:2003 and other certifications.
Our Principle: "Credibility Supremacy, and Customer First"
Our Promise: "High quality products, and Excellent Service"
Our Value: "Being Honesty, Doing the Best, and Long-lasting Development"
Our Aim: "Develop to be a leader in our industry in the world"
Pre-sales Service
1.Offering comprehensive technical and business consultation services;
2. Proposing th e most suitable scheme and equipment for our clients;
3. Designing and fabricating targeted products according to the special requirements of clients;
4.Training periodically high qualified service technician.
5.Highly inspecting equipments in every working procedure, quality comes first;
After-sales Service
1.Fast & Safe Delivery;
2.Assisting our clients for foundation construction of equipments;
3. Dispatching engineers to install and debug equipments;
4. Training the first-line operators on site;
5.Regularly visit clients to solve production problems;
6.Providing life-long maintenance service;
7.Providing technical exchanging;