Specifications
Coil width: 348mmEffective width: 284mm
Roller driven type: chain transmission
Controller: PLC
WLFM115-284 automatic popular steel roof ridge cap forming machine manufacturer
1. Profile drawing
2. Machine layout
3. Main parameter
Material spec: | Color steel sheet; |
Thickness: | 0.3 mm to 0.7 mm |
Coil width: | 348mm |
Working speed: | 0-3m/min. (Nodal distance at 250mm) |
Cutting tolerance: | ±2mm |
Main motor power: | 5.5Kw |
Hydraulic station power: | 5.5Kw |
Decoiler | manual decoiler, max capacity 3000kgs |
Main roller qty: | about 14 stands but depends on last design |
Type of cutting: | Roll-formed and length-set cutting |
Main body dimension: | About 7500mm*1500mm*1500mm |
4. Machine picture
5. Working flow
Decoiling the sheet------Sheet guiding------Roll forming------Pressing the panel------Measure length------Cutting the panel------Panels to the supporter
6. Standard equipment
3 tons passive uncoiler | 1set |
Pre-cutting equipment (Optional) | 1set |
Film covering device (Optional) | 1set |
Guiding Equipment | 1set |
Roll Forming Equipment | 1set |
Pressing equipment | 1set |
Post Cut Equipment | 1set |
Hydraulic Station | 1set |
PLC Control Penal | 1set |
Supporter Table | 2sets |