Steel Deck Floor Roll Forming Machine
Ⅰ:Composition of machine
| Roll forming main machine | 1 unit |
| Manual de-coiler | 1 unit |
| Control panel | 1 unit |
| Hydraulic station | 1 unit |
| Manual out table | 2 unit |
| Cutting device | 1unit |
hydraulic pressing system | 1unit |
II: Details of each composition
| Material Spec | Galvanized steel sheet |
| Thickness of Coil Sheet | 0.8 --1.2 mm |
| Main Motor Power | 18.5kw |
| Forming Speed | 10--12m/min |
| Hydraulic Station Power | 3kw |
| Quantity of Stands | About 24 groups |
| Hydraulic Pressure | 10~12Mpa |
| Controlling System | PLC |
| Index Error of Length | 10m±2mm |
| Total Weight | About 1800kg |
| Voltage | 380V 3 phase 60Hz or at buyers requirement |
III: Technological process
Decoiling—feeding and guide —roll forming----press---cut to length—product
packing manual
The profile:(Basis on customer’s require to design)
IV.Photo Wall
| |
| |
Terms of payment :30% pay before produce machine, 70% pay before shipment
Deliver time: 70days after received 30% down payment
After sell guarantee
1)Engineer will give free training lessons to labors in buyer’s factory.