China roof tile machine factory colored steel roof and wall tile rolling machine
No | Item | Parameter | Note | |
1 |
Suitable Material
| Type | roof and wall tile rolling machine |
roll forming machine |
| Customized Profile | |||
Thickness | 0.3-0.7mm | |||
Yield Strength | 235MPA | |||
2 | Product Specs | Cover width | Customized Profile |
|
Length | Any length |
| ||
3 | Power Specs | voltage | 380V/3PH/50HZ | Up to Practical Profile |
Main Motor | 3-11KW | |||
Hydraulic | 2.2-5.5KW | |||
4 | Machine Specs | Transmission | Chain and Sprocket | Gearbox and Cardan Acceptable |
Structure | Column Block Or Wall Plate |
| ||
Shafter | No.45 steel tempered |
| ||
Rollers | No.45 steel chrome coated | Cr12 or other acceptable | ||
Cutting Blade | Cr12 quenched |
| ||
Press Mould | Cr12 quenched |
| ||
Punch Mould | Cr12 quenched |
| ||
5 | Working Capacity | Forming Speed | 15-20m/min for standard solution | Higher Speed Solution Available |
Working Speed | Up to Length-set Cutting | |||
6 | Hydraulic Cantilever Decoiler (Optional) | Type | Hydraulic |
|
Max. Capacity | 5 T/10T/15T |
| ||
Suitable coil OD | 1200mm |
| ||
Suitable coil ID | 508/610mm |
| ||
Max Coil width | 1250mm |
| ||
7 | Forming Stand | 8-48 | Up to Practical Profile | |
8 | Forming Shaft Diameter | 55-120mm | Up to Practical Profile | |
9 | Type of Cutting | Length-set cutting after roll formed,CR12 mould steel | Pre-cutting acceptable | |
10 | Control System | Mitsubishi PLC and Inverter |
| |
11 | Output Supporter | 2 Pcs Simple Supporter | Auto Stacker Optional | |
1)- we can send our engineer to your site and do the training for your men. you just only bear the cost for our engineer's air ticket,visa,accormadation,food and transpotaion in your country
2)You can send your men to our factory. we will teach them how to operate the machine without
training charges
3)Actually theres another cheap and easy way to choose. Every machine leave our factory with one book of operation manual. You can read through the manaul first ,and get familiar with the machine. Then we can get a video call,and teach you on-line how to operate the machine.
4)Apart from above training course,we also provide 1 year warranty for all the easily broken part of the machine for free and whole-life technical service support