| Place of Origin | China |
| Model Number | EFT-CLAMP |
EFT Capacitive coupling clamp
1. Introduction
The capacitive coupling clamp is designed to work with electrical fast transient/ burst generator (EFT/B), the coupling method using the clamp is used for tests on lines connected to signal port, control port and power port. The performance of clamp is fully compliant with IEC61000-4-4.
2. Specification
Coupling capacitor | 100~1000pF |
Insulation ability | >5KV |
Dimension | 1050*140*110 |
3. Figure
IEC61000-4-4 EFT-5K16 EFT immunity measurement with 5KV Output Voltage
IEC61000-4-2 20KV Output Voltage Electrostatic Discharge Generator
IEC61000-4-5 Lightning Surge Generator with 6KV Output Voltage
IEC61000-4-11 CSS-20P1 Voltage Dips and Short Interruption Generator
IEC60950 Clause 4.2.4 30mm Circular Plane
BS EN 50636-2 Figure 1 Young Adult Arm Probe
BS EN 50636-2 Figure 2 Adult Arm Probe
IEC 60950 Figure 2C Blunt Probe
IEC60335-2-14 Test Finger Probe with 125mm Stop Face
IEC60335-1 Fingernail Test Probe with 50N Thruster