Technical Parameters
| Model | SZ-A-80(D～G) | SZ-A-100(D～G) | SZ-A-150(D～G) | SZ-A-225(D～G) | SZ-A-408(D～G) | SZ-A-608(D～G) | SZ-A-1000(D～G) |
| Inner Dimension WxHxD (mm) | 400x500x400 | 400x500x500 | 500x600x500 | 500x750x600 | 600x850x800 | 800x950x800 | 1000x1000x1000 |
| Outer Dimension WxHxD (mm) | 900x1583x1106 | 600x1650x1100 | 1000x1683x1206 | 700x1893x1628 | 800x1939x1828 | 1000x2049x1828 | 1200x2099x2028 |
| Temperature Range | -70℃～+100℃(150℃) (D:-40℃ G:-70℃) | ||||||
| Humidity Range | 20%～98%R.H.(10%-98%R.H/5%～98%R.H/5%～98%R.H is special customized ) | ||||||
| Temperature Humidity Resolution/Uniformity | 0.01℃; 0.1%R.H./±1.0℃; ±3.0%R.H. | ||||||
| Temperature Humidity Control Accuracy/Fluctuation | ±1.0℃; ±2.0%R.H./±0.5℃; ±2.0%R.H. | ||||||
| Heating/Cooling Rate | Heating rate is 3.0℃/min, cooling rate is 1.0℃/min(2℃～15℃/min is special customized) | ||||||
| Inner/Outer Material | Inner material is SUS304# stainless steel, Outer material is cold-rolled steel plate with paint treatment | ||||||
| Insulation Material | High temperature resistant high-density polyester amine hard foam insulator material | ||||||
| Cooling System | Air cooling method/Single stage compressor(-20℃), Air cooling or water cooling method/Double stage compressor（-40℃～-70℃） | ||||||
| Protection Device | Compressor overload protection switch, Refrigerant high low pressure protection switch, Over temperature protection switch, Fuse, Fault warning system | ||||||
| Spare Parts | View Window, Test Hole, Shelf, Gauze | ||||||
| Controller | Korea Samwon or Other Brand | ||||||
| Compressor | France Tecumseh or Germany Bitzer | ||||||
| Power | 1Φ220VAC±10%50/60Hz & 3Φ380VAC±10%50/60Hz | ||||||
