Product Description
AT416 Full Notch Creep Tester is used to determine the stress cracking resistance of polyethylene materials in any environment. A test specimen in the form of a square-section bar with coplanar notches in each face at the center, is subjected to a static tensile load in a temperature-controlled environment. The geometry of the specimen is such that plane strain conditions are obtained and brittle failure occurs under appropriate tensile load and temperature conditions. The time for this brittle failure to occur after loading is recorded.
Standard
ISO 16770, 899 | GB/T 11546 |
Details & Features
Model | AT416 |
Specimen size | 100mm×10mm×10mm, 100mm×10mm×4mm, 90mm×6mm×6mm |
Load range | 20N~5000N |
Load accuracy | ±1% of nominal value (with automatic calibration function) |
Working position | 6 |
Displacement range | 0~200mm |
Displacement accuracy | 0.027mm |
Temperature range | RT~95℃ or 23℃~95℃ (with refrigeration device) |
Temperature accuracy | ±0.5℃ |
Power supply | AC380V, 50Hz |
Dimensions | 1620×850×1750mm |
Specification
★ 6 independent test positions, automatic loading, easy to operate, accurate and reliable
★ Independent elastic supporting mechanism, non-interfering
★ Industrial PC control, touch screen operate, can store file, test data and automatically calculate failure time under condition of specified load, and also can draft several curves such as displacement-time, load-time, stress-failure time
★ Test environment: thermostatic water bath
★ High precision servo motor drive system, excellent performance, long service life, low noise
Our Company
History
Since 1982 with more than 20 years’ experience
Warranty
Two Year Warranty for whole product
Training
Video and user manual for training
Onsite service
Installation and training service is available
Testing service
Free sample testing before order is available
Lead time
15 working days lead time for most product
Packing & Delivery
Packaging | ||
Packaging Details | 1. The equipment is covered with film is protect it from water vapour during the trip. 2. The box is filled with foam to protect the equipment from impact. 3. Exported wooden box made from plywood, don't need fumigated. | |
Payment
Payment Term | T/T | EXW | 30% T/T in advance, paid the balance before shipment | ||
FOB | |||||
CFR(C&F) | |||||
CIF | |||||
L/C | L/C amount above 50,000 usd, we can accept L/C at sight | ||||
West Union | Amount lower than 5000usd | ||||
West Union | |||||
Delivery Time | 7~10days after receiving payment for one container | ||||
Contacting Us
