AT821 Dropping Point and Softening Point Tester is used for composition control and quality inspection of tar, asphalt, paraffin, resin, rosin, grease, Vaseline, ointment, ointment, suppository, ointment, edible oil, etc. Determinate the drop point and softening point of amorphous polymers, physical and chemical properties such as density, polymerization degree and heat resistance
It can replace the traditional Ubbelohde drop point determination and global softening point determination.
ASTMD 3461 |
|
|
1. Photoelectric test, temperature program control, LCD display, high precision and stable performance
2. Accurate heating rate, ensure the test results are accurate.
AT821 |
|
Measure range |
RT~300°C |
Gauge |
70mm |
Fiber type |
Cotton or wool (alternative) |
Twisting range |
50-250 twist/m |
Minimum Digital Display |
0.1°C |
Linear Heating Rates |
0.2, 0.5, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0°C/min |
The Dimension of Cup |
Φ9.9mm (inside diameter), R4.6±0.1mm (bottom radius) |
Hole Size |
Φ2.80mm (dropping- point), Φ6.35mm (softening-point), Φ5.00mm (user choose) |
Ball |
Lead Ball (Φ8mm, 3.2±0.1g, according to ASTM) Steel Ball (3/8", according to GB2728-1988; 5/6"user choose) |
Furnace Temperature |
≤200°C ±0.5°C; >200°C ± 1°C |
Weight (Gross) |
11kg |
Overall Dimensions |
|
Spindle drive |
Z or S twist optional |
Power |
220V/380V, 50/60Hz, 550W |
Dimension |
1000*800*1600mm |