Product Description
AT107 Moisture Management Tester (MMT) is an equipment to measure the dynamic liquid transport properties of textiles such as knitted and woven fabrics in three dimensions:
- Absorption Rate - Moisture absorbing time of the fabric’s inner and outer surfaces.
- One-way Transportation Capability - Liquid moisture one-way transfer from fabric’s inner surface to outer surface
- Spreading/Drying Rate - Speed of liquid moisture spreading on fabric’s inner and outer surfaces
Principle:
MMT consists of upper and lower concentric moisture sensors. The specimen is held flat under fixed pressure between the sensors while standard test solution is introduced on to the top surface of the fabric. Electrical resistance changes between the upper and lower sensors are then recorded dynamically on computer.
MMT permits the measurement of the following indexes:
- Wetting Time Top/Bottom (WTT/WTB)
- Absorption Rate Top/Bottom (TAR/BAR)
- Maximum Wetted Radius Top/Bottom (MWRT/MWRB)
- Spreading Speed Top/Bottom (TSS/BSS)
- Accumulative One-Way Transport Capacity (R)
- Overall Moisture Management Capacity (OMMC)
Standard
AATCC 195 | SN/T 1689.1 | GB/T21655.2 | ||
Note: For more standards, please contact us | ||||
Specification
Model | AT107 |
Interface | WiFi |
Operation Temp & RH | 18℃ to 40℃, 20% to 80% (non-condensing) |
Pump On Time | 20sec |
Test Solution | Conductivity - 16 mS± 0.2 mS |
Upper Weight | 4.65N±0.05 |
Power supply | 110V~230V 50Hz/60Hz 0.5 A |
Dimensions | (H) 240mm, (L) 320mm, (W) 200mm |
Net weight | 8kg |
Details & Features
★Shell all-metal structure, external interference signal has good anti-interference ability
★Improving the structure of testing sensor, manual to automatic , the upper sensor, driven by a stepper motor built-in pressure testing equipment, to the fixed pressure automatically stop, can automatically return after the test
★Improving the structure of the pump water ,pump water uniformly stable, and can adjust pump water flow by software，Water pump can reverse pumping, make the liquid left in the pipe return to storage tank, prevent brine crystallization plugging silicone tube
★The test results data can send to PC by WiFi, Graphical display of water droplets diffusion process, to make the perfect test report.
Our Company
History
Since 1982 with more than 20 years’ experience
Warranty
Two Year Warranty for whole product
Training
Video and user manual for training
Onsite service
Installation and training service is available
Testing service
Free sample testing before order is available
Lead time
15 working days lead time for most product
Packing & Delivery
Packaging | ||
Packaging Details | 1. The equipment is covered with film is protect it from water vapour during the trip. 2. The box is filled with foam to protect the equipment from impact. 3. Exported wooden box made from plywood, don't need fumigated. | |
Payment
Payment Term | T/T | EXW | 30% T/T in advance, paid the balance before shipment | ||
FOB | |||||
CFR(C&F) | |||||
CIF | |||||
L/C | L/C amount above 50,000 usd, we can accept L/C at sight | ||||
West Union | Amount lower than 5000usd | ||||
West Union | |||||
Delivery Time | 7~10days after receiving payment for one container | ||||
Contacting Us
