1.Use the high precision microcomputer touch temperature and humidity controller with high stability of platinum resistance to temperature and wind speed in the circulatory system of temperature and humidity test.
2.control temperature&humidity well-distributed, precisely and steady.
3. Completely independent system separate for testing in high temperature, low temperature and constant temperature&humidity environment.
Specification:
|
Model |
A |
B |
C |
D |
E |
||||
|
Inner size W×H×D(cm) |
40*50*40 |
50*60*50 |
50*75*60 |
60*85*80 |
100*100*80 |
||||
|
Outside size W×H×D(cm) |
93*155*95 |
100*148*106 |
117*166*91 |
140*176*101 |
170*186*111 |
||||
|
Inner chamber volume(V) |
80L |
150L |
225L |
408L |
800L |
||||
|
Temperature and humidity Controll range |
-40°C~150°C RH20%-98% |
||||||||
|
Function |
Temperature and humidty fluctuation |
±0.5°C;±2.5%RH |
|||||||
|
Temperature and humidity deviation |
±0.5°C-±2°C;±3%RH(>75%RH); ±5%RH(≤75%RH) |
||||||||
|
Controller resolution |
±0.3°C;±2.5%RH |
||||||||
|
Controller brand |
Korea TEMI880 |
||||||||
|
Heating Time (RT-HT)°C/min |
100 |
150 |
|||||||
|
40 |
50 |
||||||||
|
Cooling Time (RT-LT)°C/min |
-20 |
-40 |
-60 |
-70 |
|||||
|
40 |
50 |
55 |
80 |
||||||
|
Power supply KW |
4.0 |
6.0 |
6.0 |
6.0 |
|||||
|
Material |
Inner material |
SUS 304# steel plate |
|||||||
|
Outside material |
SUS 304# steel plate(surface disposing) |
||||||||
|
Thermal insulation material |
Thermostability high density chlorine formic acid foam insulator material |
||||||||
|
System wind pathround-robin mode |
centrifugal fan-broadband enforce circulation |
||||||||
|
Refrigeration way |
Single stage compression refrigeration |
||||||||
|
Refrigerator |
whole sealing piston France Taikang brand Compressor |
||||||||
|
Freezing fluid |
R4O4A or USA Dupont environmental protection refrigerant(R23+R404) |
||||||||
|
Condensation way |
forced air cooling or water-cooling |
||||||||
|
Heater |
Nichrome heating wire heating |
||||||||
|
Humidifier |
Semi-enclosed steam humidification |
||||||||
|
Water-provide way |
full-automatic periodical feeding |
||||||||
|
Standard configuration |
1 Observe window(double-deck cavity toughened glass),1 50mm test hole in the left,1 PL inner chamber lamp,2clapboards, 1 bag of wet and dry bulb,3 fuses, 1 power line. |
||||||||
|
Safety device |
Non- fuse-switch(compressor overload, refrigerant high low voltage,over-humidity and temperature protection,Protection switch,fuse stoppage warning system |
||||||||
|
Power |
1φ 220V AC±10% 50/60Hz 3φ 380V AC±10% 50/60Hz |
||||||||
Fumigated Heat Treating Wooden Package
Ship from Shenzhen Seaport or Shenzhen/Guangzhou/Hongkong by Air
KeJian Instrument Service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.
Onsite Service:
1.Device installation 2.Equipment Operation Test Technology training 3. Equipment Calibration 4.Daily maintenance and maintenance of equipment
Free technical training for visiting factories 24-hour Online contact
Free software upgrades
Free information:
1.Product Instruction;2.Product operation instruction/video;3.Experiment Test (test application, test report)
Device Problem Handling:
1. Social media 24 hours online communication;2. Mail Seamless Docking;3. Video Conferencing;4. Artificial free door-to-door service
Guangdong KeJian Testing Instrument co., LTD., founded in 2003, is a professional research and development, production of precision testing instruments and provides a complete set of test solution technology enterprises, with professional factory equipment technology research and development team and excellent production, management level, continuously provide customers with satisfactory products and services, and gradually become the industry's leading supplier of instrumentation.
In line with the trend of market globalization, Kejian Instruments registered its wholly-owned subsidiary - Kejian Industrial Hong Kong Limited in 2009, and began to explore the international market and provide Kejian instruments products to overseas customers. So far, Kejian instruments has provided high-quality products and services to customers in more than 50 countries and regions around the world, many of which have become long-term partners because of their recognition and trust in Kejian instruments.
Based on the recognition of Kejian Instruments, The National Standards Drafting Committee invited us to participated in the drafting and revision of a number of national standards, and was invited to attend the adhesive industry summit forum for many times, sparing no effort to contribute to the development of national and industrial technologies.
1. Why Choose Us?
(1)Focusing on this testing field for over 15 years makes us professional.
(2)Located in Dongguan city--the world class manufacturing city.
(3)After-sales service for 12 months, promptly deal with all the problems.
2. Are you a factory?
Yes, we are.
3. What's the product delivery time?
Within 10 work days after deposit received.
If we have stock, the delivery time will be greatly shortened.
4. What's your terms of trade?
We accept EXW, FOB, CIF, CNF and so on.