Hydrostatic Pipe Testing Equipment is mainly used to determine of the resistance of thermoplastics pipes to constant internal water pressure at constant temperature. It conforms to ISO 1167 ,EN 921,ASTM D1598 1599. It is mainly used in testing the short-time hydraulic failure and resistance to constant internal pressure of the plastic pipes for the transport of fluids

 

Specifications:

Main frame (3 stations 3 Ports)	Max Pressure:   10 Mpa
Precision Pressure Control Unit	3 piece (1 piece/1 station)
Electric Solenoid valve (Germany GSR):	6pieces(2 piece/1 station)
Pressure transfer unit	3piece (1 piece/1 station)
Single valve	several
Pressure pump (From Giant, USA)	1 set
Precision software of hydrostatic pressure testing machine and adapter	one set
DELL computer and H P Color printer:	one set /each
Constant temperature water tank,Temperature range (20 to 95°C)	one set
Working pressure	0-10Mpa,resolution: 0.01 Mpa

 

1.The control parameters (pressure time, accuracy) can be input from the micro-control unit at the testing machine or from computer.

2.The machine and the computer can separately or simultaneously display the time (Max.9999hours 59 minutes 59 seconds)and the pressure(three figures after the point)and eight testing condition(Pressure up, pressure down , over pressure ,pressure compensate, running, end, leakage and exploding ).When the pressure overload, end, leakage and explode take place simultaneously, there is light and voice alarm.

 

3.The machine has the following function: observe, analysis, inquire, save, print, testing curve(pressure-time)and starting time, setting time, current time, valid time, invalid time, remaining time, over pressure time, pressure compensating time and etc